BenQ W6000 manual Using the preset and user modes, Selecting a preset mode

Page 26

English

Using the preset and user modes

Selecting a preset mode

The projector is preset with several pre-defined picture modes so that you can choose one to suit your operating environment and input source picture type.

To select a picture mode that suits your need:

•Using the remote control

1.Press PRESET MODE repeatedly or USER 1, USER 2/ISF NIGHT, USER 3/ISF DAY, DEFAULT on the remote control, or PRESET MODE on the projector repeatedly until your desired mode is selected.

•Using the OSD menu

1.Press MENU and then press / until the Picture -- Basic menu is highlighted.

2.Press to highlight Picture Mode.

3.Press / until your desired mode is selected.

These modes consist of preset values suitable for various projection situations as described below:

Picture -- Basic

Picture Mode

Cinema

Load Settings From

 

Brightness

+50

Contrast

+50

Color

+50

Tint

0

Sharpness

+ 3

Reset Picture Settings

 

Rename User Mode

 

S-Video

EXIT Back

•Cinema: With well-balanced color saturation and contrast with a low

brightness level, this is most suitable for enjoying movies in a totally dark environment (as you would find in a commercial cinema).

•Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms.

•Standard: It is slightly brighter than Cinema mode, and suitable for use in rooms where there is a small amount of ambient light.

•User 1/User 2/User 3: Recalls the customized settings. See "Setting the User 1/User 2/User 3 mode" on page 27 for details.

Fine-tuning the selected picture mode

The pre-defined picture mode settings can be altered via the available items shown in the Picture -- Basic and Picture -- Advanced menus.

To fine-tune the picture mode:

1.Press MENU and then press / until the Picture -- Basic or Picture -- Advanced menu is highlighted.

2.Press to highlight the item you want to adjust and press / to set your desired value. Your selection is automatically stored in the projector and associated with that input source.

See "Fine-tuning the picture quality" on page 28 and "Advanced picture quality controls" on page 29 for details.

Each time you change the picture mode, the projector also changes the setting to the one which was last set for that particular picture mode on that particular input. If you change the input source, the most recently used picture mode and settings for that input and resolution will be restored.

26 Using the projector

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Welcome W6000 Digital Projector Home Cinema SeriesTable of contents Important safety instructions Do not cover the projector with any item Disposal Moisture condensationAvoid volatile liquids Shipping contents OverviewCeiling mounting the projector Remote control batteriesRemote control operation Projector features Rear view Projector exterior viewFront and upper side view Under viewControl panel Test Remote controlPicture window control keys PIP, Size InfoCeiling Front Choosing a locationFloor Front Floor RearObtaining a preferred projected image size Determine the aspect ratio of your screen, 169 or 43?Projection dimensions Installation for a 169 ratio screenLens Installation for a 43 ratio screenHighest Height HShifting the projection lens To use the lens shift leverReference Picture quality Connecting Hdmi devicesPreparations ComponentConnecting component-video devices Connecting S-Video or video devicesConnecting a computer Connect the projector to a computer with a VGA cableTurning the projector on PreparationsAdjust the projected picture to the size that Fine-tuning the image size and clarityUsing the OSD menu You need using the zoom ring RingUse / to highlight the System Setup menu Using the menusUsing a security cable lock Securing the projectorIf you forget the password Utilizing the password functionSetting a password To leave the OSD menu, press MenuDisabling the password function Entering the password recall procedureChanging the password Write down the number and turn off your projectorCorrecting picture distortion Adjusting the projected imageAdjusting the projection angle Two parallel sidesFine-tuning the selected picture mode Using the preset and user modesSelecting a preset mode To fine-tune the picture modePress to highlight Load Settings From Setting the User 1/User 2/User 3 modeResetting the picture mode To reset the picture mode to the preset factory valuesFine-tuning the picture quality Advanced picture quality controls Setting Black LevelSelecting a color temperature Controlling image clarityAdjusting Brilliant Color Setting a preferred color temperatureSelecting a Gamma setting To set a preferred color temperatureColor Management Setting Film ModeTo adjust and store the settings About the aspect ratio Setting 3D Comb FilterSelecting the aspect ratio Aspect ratio Aspect ratio image Using Panamorph lenses optionalImage Using the entire resolution 169 displayTo activate High Altitude Mode Operating in a high altitude environmentHighlight PIP and press / to select On To display the PIP window Using the remote controlDisplaying more than one image source simultaneously PIP function is effective at below source combinationsTurning the projector off Personalizing the projector menu displayLocking control keys To lock the keysMain menu Sub-menu Options On-Screen Display OSD menusOn-Screen Display OSD structure Information Resolution System SetupSetup Function Description Picture -- Basic menuPicture -- Advanced menu System Setup menu Display menuLamp Power Normal Menu SettingsAdvanced Setup menu Reset Lamp TimerInformation menu Care of the projector Cleaning the lensCleaning the projector case Storing the projectorLamp information Setting Lamp Power as EconomicSetting Auto Off Getting to know the lamp hourStatus Message Timing of replacing the lampReplacing the lamp Remove the lamp cover Resetting the lamp timer Power IndicatorsPower Temp Lamp Status & Description Lamp Status & DescriptionTroubleshooting Problem Cause RemedyElectrical SpecificationsOptical TerminalsMm x 317 mm x 145 mm W x D x H DimensionsCeiling mount installation Supported timing for PC input Timing chartFormat Resolution Refresh rate Frequency KHz MHzSupported timing for Edtv and Hdtv via Component inputs Format Resolution Refresh rate Hz Freq. KHz Pixel Freq. MHzFormat Resolution Refresh rate Freq. KHz Pixel Freq MHz Supported timing for Video and S-Video inputsDisclaimer WarrantyCopyright MIC statement FCC statement for United States usersEEC statement for European users Weee directiveEnglish
Related manuals
Manual 6 pages 48.59 Kb

W6000 specifications

The BenQ W6000 is a high-performance home theater projector that is designed to deliver an immersive viewing experience for movies, sports, and gaming. With its advanced features and cutting-edge technologies, the W6000 stands out in the crowded projector market, making it a popular choice for home cinephiles and casual viewers alike.

One of the key features of the BenQ W6000 is its impressive brightness, rated at 2000 ANSI lumens. This ensures that images remain vivid and clear even in rooms with ambient light. The projector's contrast ratio, reaching 3,000:1, enhances the depth of blacks and the brilliance of whites, providing an engaging viewing experience with rich detail.

The W6000 boasts Full HD 1080p resolution (1920 x 1080), which allows it to deliver crystal-clear images without any loss of detail. This is especially important for high-definition content, as it captures the intricacies of films and TV shows, making every scene come to life. Additionally, the projector is equipped with the latest DLP (Digital Light Processing) technology, ensuring smooth performance and vibrant color reproduction.

Color accuracy is a significant consideration for home theater projectors, and the BenQ W6000 excels in this area. With its 6-segment color wheel and BrilliantColor technology, it offers a wide color gamut that produces lifelike images with stunning realism. The projector also features a built-in color management system, allowing users to fine-tune color settings to their liking.

Another notable characteristic of the W6000 is its versatile lens design. The projector includes a 1.5x optical zoom and horizontal/vertical lens shift, providing flexible installation options. This feature is particularly beneficial when accommodating various room sizes and viewing distances, ensuring that users can enjoy a big-screen experience without compromising image quality.

Connectivity is also a strong point for the BenQ W6000, as it supports multiple inputs such as HDMI, VGA, and composite video. This allows users to connect a variety of devices, from laptops and gaming consoles to Blu-ray players and streaming devices. The projector is compatible with 3D content as well, making it an excellent choice for fans of immersive entertainment.

In summary, the BenQ W6000 is a feature-rich home theater projector that combines brightness, resolution, color accuracy, and flexibility. Its advanced DLP technology, high contrast ratio, and comprehensive connectivity options make it an ideal choice for anyone looking to elevate their home viewing experience. Whether you're watching the latest blockbuster or gaming with friends, the W6000 delivers outstanding performance and quality that is sure to impress.
Top Page Image Contents