BenQ W6000 manual Displaying more than one image source simultaneously

Displaying more than one image source simultaneously

Your projector is capable of displaying pictures simultaneously from two input sources, which can be used to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly connected to the projector.

English

To display the PIP window:

•Using the remote control

Press PIP to display the PIP page and make adjustments by following the steps starting from step 3 in the section "Using the OSD menu" below.

When the PIP window is on, to change the PIP window size, press SIZE repeatedly until a desired size is selected.

When the PIP window is on, to change the PIP window position, press POSITION repeatedly until a desired position is selected.

When the PIP window is on, to highlight one of the sources to make adjustments, press ACTIVE repeatedly until the source is selected.

•Using the OSD menu

1.Press MENU and then press / until the Display menu is highlighted.

2.Press to highlight PIP and press ENTER. The PIP page displays.

3.Highlight PIP and press / to select On.

The projector will select two currently active signals to display and the last viewed picture will be displayed on the big screen as a main source.

The PIP function is effective at below source combinations.

		Source 2
Source 1	CVBS		S-Video
HDMI 1/2	V		V
Component 1/2	V		V
PC	V		V

Display

Aspect Ratio	Anamorphic
Keystone
Position
Overscan Adjustment	0
PIP	ENTER
PC & Component YPbPr Tuning
S-Video	EXIT Back
PIP
PIP	On
Main Source
Second Source
Active Window	Main
Position	Top-Right
Size	Large

EXIT Back

4.To change the Main Source or Second Source, press to highlight Main Source or Second Source and press ENTER. The source selection bar displays.

5.Use / to highlight the source you want to display for the main (bigger) or second (smaller) window, and press ENTER to save the setting and go back to the PIP page.

6.To make OSD settings to one of the two sources (main or second),

highlight Active Window and press / to select the source you want to make adjustments.

The settings made on the OSD menus will only take effect on the active window. The following OSD menu function cannot work on the active windows for the PIP: Auto Source Search.

7.To change the position of the smaller picture, highlight Position and press / repeatedly until a suitable position is selected.

8.To resize the small picture, highlight Size and press / to set the PIP size among Small or Large.

9.To save the settings and leave the OSD menu, press MENU once or EXIT repeatedly until the menu disappears.

Using the projector 35