BenQ W6000 manual Troubleshooting, Problem Cause Remedy

Page 49

Troubleshooting

Problem

Cause

Remedy

 

 

Plug the power cable into the AC inlet on the

 

There is no power from the power

rear of the projector, and plug the power cable

 

into to the power outlet. If the power outlet

 

cable.

 

has a switch, make sure that it is switched on.

The projector does not

 

 

(See page 20.)

turn on.

 

 

Attempting to turn the projector on

Wait until the cooling down process has

 

 

again during the cooling process.

completed.

 

 

 

 

The lamp cover is not securely

Correctly attach the lamp cover. (See page 45.)

 

attached.

 

 

 

 

 

 

The video source is not turned on or

Turn the video source on and check that the

 

signal cable is connected correctly. (See page

 

connected correctly.

 

17.)

 

 

 

 

 

No picture.

The projector is not correctly

Check the connection. (See page 17.)

connected to the input source device.

 

 

 

 

 

 

The input source has not been

Select the correct input source with the Source

 

keys on the remote control or SOURCE on the

 

correctly selected.

 

projector. (See page 21.)

 

 

 

 

 

Image is unstable.

The connection cables are not securely

Correctly connect the cables to the

connected to the projector or the

appropriate terminals. (See page 17.)

 

signal source.

 

 

 

 

 

 

The projection lens is not correctly

Adjust the focus of the lens using the focus

 

focused.

ring. (See page 21.)

Picture is blurred.

 

 

The projector and the screen are not

Adjust the projection angle and direction as

 

well as the height of this projector if necessary.

 

aligned properly.

 

(See page 25.)

 

 

 

 

 

 

The batteries are out of power.

Replace both of the batteries with new ones.

 

(See page 7.)

 

 

Remote control does

 

 

There is an obstacle between the

Remove the obstacle. (See page 7.)

not work correctly.

remote control and the projector.

 

 

 

 

 

You are too far away from the

Stand within 8 meters (26.2 feet) of the

 

projector.

projector. (See page 7.)

 

 

 

English

Additional information

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents W6000 Digital Projector Home Cinema Series WelcomeTable of contents Important safety instructions Do not cover the projector with any item Avoid volatile liquids Moisture condensationDisposal Overview Shipping contentsRemote control operation Remote control batteriesCeiling mounting the projector Projector features Front and upper side view Projector exterior viewRear view Under viewControl panel Picture window control keys PIP, Size Remote controlTest InfoFloor Front Choosing a locationCeiling Front Floor RearDetermine the aspect ratio of your screen, 169 or 43? Obtaining a preferred projected image sizeInstallation for a 169 ratio screen Projection dimensionsHighest Installation for a 43 ratio screenLens Height HTo use the lens shift lever Shifting the projection lensPreparations Connecting Hdmi devicesReference Picture quality ComponentConnecting S-Video or video devices Connecting component-video devicesConnect the projector to a computer with a VGA cable Connecting a computerPreparations Turning the projector onUsing the OSD menu Fine-tuning the image size and clarityAdjust the projected picture to the size that You need using the zoom ring RingUsing a security cable lock Using the menusUse / to highlight the System Setup menu Securing the projectorSetting a password Utilizing the password functionIf you forget the password To leave the OSD menu, press MenuChanging the password Entering the password recall procedureDisabling the password function Write down the number and turn off your projectorAdjusting the projection angle Adjusting the projected imageCorrecting picture distortion Two parallel sidesSelecting a preset mode Using the preset and user modesFine-tuning the selected picture mode To fine-tune the picture modeResetting the picture mode Setting the User 1/User 2/User 3 modePress to highlight Load Settings From To reset the picture mode to the preset factory valuesFine-tuning the picture quality Selecting a color temperature Setting Black LevelAdvanced picture quality controls Controlling image claritySelecting a Gamma setting Setting a preferred color temperatureAdjusting Brilliant Color To set a preferred color temperatureTo adjust and store the settings Setting Film ModeColor Management Selecting the aspect ratio Setting 3D Comb FilterAbout the aspect ratio Image Using the entire resolution Using Panamorph lenses optionalAspect ratio Aspect ratio image 169 displayOperating in a high altitude environment To activate High Altitude ModeDisplaying more than one image source simultaneously To display the PIP window Using the remote controlHighlight PIP and press / to select On PIP function is effective at below source combinationsLocking control keys Personalizing the projector menu displayTurning the projector off To lock the keysOn-Screen Display OSD structure On-Screen Display OSD menusMain menu Sub-menu Options Setup System SetupInformation Resolution Picture -- Advanced menu Picture -- Basic menuFunction Description Display menu System Setup menuAdvanced Setup menu Menu SettingsLamp Power Normal Reset Lamp TimerInformation menu Cleaning the projector case Cleaning the lensCare of the projector Storing the projectorSetting Auto Off Setting Lamp Power as EconomicLamp information Getting to know the lamp hourReplacing the lamp Timing of replacing the lampStatus Message Remove the lamp cover Resetting the lamp timer Power Temp Lamp Status & Description IndicatorsPower Lamp Status & DescriptionProblem Cause Remedy TroubleshootingOptical SpecificationsElectrical TerminalsCeiling mount installation DimensionsMm x 317 mm x 145 mm W x D x H Format Resolution Refresh rate Frequency Timing chartSupported timing for PC input KHz MHzFormat Resolution Refresh rate Freq. KHz Pixel Freq MHz Format Resolution Refresh rate Hz Freq. KHz Pixel Freq. MHzSupported timing for Edtv and Hdtv via Component inputs Supported timing for Video and S-Video inputsCopyright WarrantyDisclaimer EEC statement for European users FCC statement for United States usersMIC statement Weee directiveEnglish
Related manuals
Manual 6 pages 48.59 Kb

W6000 specifications

The BenQ W6000 is a high-performance home theater projector that is designed to deliver an immersive viewing experience for movies, sports, and gaming. With its advanced features and cutting-edge technologies, the W6000 stands out in the crowded projector market, making it a popular choice for home cinephiles and casual viewers alike.

One of the key features of the BenQ W6000 is its impressive brightness, rated at 2000 ANSI lumens. This ensures that images remain vivid and clear even in rooms with ambient light. The projector's contrast ratio, reaching 3,000:1, enhances the depth of blacks and the brilliance of whites, providing an engaging viewing experience with rich detail.

The W6000 boasts Full HD 1080p resolution (1920 x 1080), which allows it to deliver crystal-clear images without any loss of detail. This is especially important for high-definition content, as it captures the intricacies of films and TV shows, making every scene come to life. Additionally, the projector is equipped with the latest DLP (Digital Light Processing) technology, ensuring smooth performance and vibrant color reproduction.

Color accuracy is a significant consideration for home theater projectors, and the BenQ W6000 excels in this area. With its 6-segment color wheel and BrilliantColor technology, it offers a wide color gamut that produces lifelike images with stunning realism. The projector also features a built-in color management system, allowing users to fine-tune color settings to their liking.

Another notable characteristic of the W6000 is its versatile lens design. The projector includes a 1.5x optical zoom and horizontal/vertical lens shift, providing flexible installation options. This feature is particularly beneficial when accommodating various room sizes and viewing distances, ensuring that users can enjoy a big-screen experience without compromising image quality.

Connectivity is also a strong point for the BenQ W6000, as it supports multiple inputs such as HDMI, VGA, and composite video. This allows users to connect a variety of devices, from laptops and gaming consoles to Blu-ray players and streaming devices. The projector is compatible with 3D content as well, making it an excellent choice for fans of immersive entertainment.

In summary, the BenQ W6000 is a feature-rich home theater projector that combines brightness, resolution, color accuracy, and flexibility. Its advanced DLP technology, high contrast ratio, and comprehensive connectivity options make it an ideal choice for anyone looking to elevate their home viewing experience. Whether you're watching the latest blockbuster or gaming with friends, the W6000 delivers outstanding performance and quality that is sure to impress.
Top Page Image Contents