BenQ SH940 Advanced Setup menu, Lamp Settings, Hdmi Settings, Baud Rate, Test Pattern, Password

Page 49

Advanced Setup menu

Function

Description

 

Lamp Power

 

Selects the projector lamp power between Normal and Economic modes.

 

Reset Lamp Timer

Lamp Settings

Once the lamp is renewed, select Reset to return the lamp timer to "0". See

"Resetting the lamp timer" on page 55 for details.

 

 

Equivalent Lamp Hour

 

Shows the lamp hour information. See "Getting to know the lamp hour" on

 

page 52 for details.

 

 

 

Selects an input source type for the HDMI signal. Auto is the default and

HDMI Settings

recommended setting. You can also manually select the source type. The

different source types carry different standards for the brightness level.

 

This function is only available when the HDMI signal is selected.

 

 

 

Selects a baud rate that is identical with your computer’s so that you can

Baud Rate

connect the projector using a suitable RS-232 cable and update or download

the projector’s firmware. This function is intended for qualified service

 

 

personnel.

 

 

 

Press ENTER to display the grid test pattern. It helps you adjust the image size

Test Pattern

and focus and check that the projected image is free of distortion.

The function is only available when the projector detects no input

 

 

signal.

High Altitude

A mode for operation in areas like high altitude or high temperature. See

Mode

"Operating in a high altitude environment" on page 39 for details.

 

 

Audio Settings

See "Adjusting the sound" on page 36 for details.

 

 

 

Password

 

Limits use of the projector to only those who know the correct password. See

Password

"Utilizing the password function" on page 23 for details.

Change Password

 

 

You will be asked to enter the current password before changing to a new one.

 

See "Utilizing the password function" on page 23 for details.

Lan Control

See "Controlling the projector through a Lan environment" on page 37 for

Settings

details.

 

 

 

Returns all settings to the factory preset values.

Reset All Settings

The following settings will still remain: names of user modes,

Keystone, Language, Projector Position, High Altitude Mode,

 

 

Password, and Expert Mode.

 

 

 

The Expert Mode menu is password protected and only accessible by

 

authorized calibrators. The ISF (Imaging Science Foundation) has developed

 

carefully crafted, industry-recognized standards for optimal video performance

Expert Mode

and has implemented a training program for technicians and installers to use

these standards to obtain optimal picture quality from BenQ video display

 

devices. Accordingly, we recommend that setup and calibration be performed

 

by an ISF certified installation technician.

 

For more information, please go to www.imagingscience.com or

 

contact the place you purchased the projector.

English

Using the projector

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents SH940 Digital Projector Table of contents Important safety instructions Important safety instructions Avoid volatile liquids Moisture condensationDisposal Overview Shipping contentsRemote control operation Remote control batteriesCeiling mounting the projector Projector features Front and upper side view Projector exterior viewRear view Under viewControl panel Controls and functionsRemote control Choosing a location Positioning your projectorObtaining a preferred projected image size Installation for a 169 ratio screen Projection dimensionsFloor Installation Ceiling Installation Installation for a 43 ratio screenScreen dimensions Projection distance D Lowest Highest Screen aspect ratio is 43 and the projected picture isTo use the lens shift lever Shifting the projection lensConnecting Hdmi devices Connecting with video equipmentPreparations Connecting video devices Connecting component-video/RGB devicesConnecting a monitor Connecting a computerTurning the projector on Using the projectorPreparations Selecting an input source Using the OSD menuChanging Color Space Using a security cable lock Using the menusSecuring the projector Setting a password Utilizing the password functionIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Adjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarityCorrecting picture distortion Selecting a preset mode Using the preset and user modesFine-tuning the selected picture mode To fine-tune the picture modeResetting the picture mode Setting the User 1/User 2 modeTo reset the picture mode to the preset factory values Renaming user modesFine-tuning the picture quality Selecting a color temperature Setting Black LevelAdvanced picture quality controls Controlling image claritySelecting a Gamma setting Setting a preferred color temperatureAdjusting Brilliant Color To set a preferred color temperatureColor Management Setting Film ModeSelecting the aspect ratio Setting 3D Comb FilterAbout the aspect ratio Using Panamorph lenses optional Freezing the image Hiding the imageAdjusting the sound quality Adjusting the soundTurning off the Power On/Off Ring Tone Muting the soundControlling the projector through a Lan environment Configuring the Lan Control SettingsControlling the projector remotely through a web browser If you are in a Dhcp environmentEnter Operating in a high altitude environment To activate High Altitude ModeTo display the PIP window Displaying more than one image source simultaneouslyTurning the projector off Power II or OFF againOn-Screen Display OSD structure On-Screen Display OSD menusPicture BasicDisplay SetupSystem Dhcp Information ResolutionLoad Settings Picture ModeReset Picture SettingsYPbPr Tuning AdjustmentBlank Timer Display menuMenu Settings System Setup menuLanguage Splash ScreenClosed Caption Closed Caption EnableStandby Monitor OutLamp Settings Advanced Setup menuHdmi Settings Audio SettingsInformation menu ResolutionSource Equivalent LampCare of the projector Additional informationSetting Auto Power Off Setting Lamp Power as EconomicLamp information Getting to know the lamp hourReplacing the lamp Timing of replacing the lampStatus Message English Resetting the lamp timer Power events IndicatorsLight Status & Description Problem Cause Remedy TroubleshootingGeneral characteristics SpecificationsOptical ElectricalCeiling mount installation DimensionsSupported timing for PC input Timing chartFormat Refresh rateFormat Resolution Refresh rate Freq. KHz Pixel Freq MHz Format Resolution Refresh rate Hz Freq. KHz Pixel Freq. MHzSupported timing for Hdmi Hdcp input Supported timing for Edtv and Hdtv via Component inputsWarranty Warranty and Copyright informationCopyright Disclaimer
Top Page Image Contents