BenQ SH940 user manual Specifications, Optical, Electrical, Terminals, General characteristics

Page 58

English

Specifications

All specifications are subject to change without notice.

Optical

Projection system			Single-chip DLP™ system.
DMD chip			0.65" DLP (1920 x 1080)
Lens			F = 2.48 to 2.81, f = 24.1 to 36.15 mm
Projection screen size			30" to 300"
Lamp			300W
		Electrical	PC: 640 x 400 to 1920 x 1200


Compatibility
			Video: NTSC, PAL, SECAM, YPbPr (480i/480p/576i/576p), HDTV
			(720p/1080i/1080p)
			DDC 2B
Color Space			Typ. = 60% NTSC (Target Color Gamut = HDTV Rec. 709)
		Terminals	Analog RGB: D-Sub 15-pin (female) x 1


Input
			HDMI (V. 1.3) x 2
			Component Video in 5BNC x 1
			Component Video (Y/CB/CR, Y/PB/PR) x 1 (shared with RGB input)
			Composite Video x 1
			PC Audio x 1
Output			12VDC (Max. 0.5 A)
			Analog RGB: D-Sub 15-pin (female) x 1
			PC Audio x 1
			Speaker: 10W x 1
Control			Serial Connector: RS232 9 pin (male)
			Mini B type USB x 1

IR receiver x 2

			LAN x 1
		General characteristics


Projector weight			< 7.2 kg (15.9 lbs)
Power			VAC 100-240V, 5A, 50-60Hz (Automatic)
Power consumption			Max. 470W; Standby < 0.5 W
Operating temperature			0 °C to 40 °C at sea level
Operating humidity			10% - 90% (without condensation)
Operating altitude			0-1499 m at 0°C-35°C
			1500-3000 m at 0°C-30°C (with High Altitude Mode on)
Storage temperature			-20°C- 60°C/-4°F to 140°F
Storage humidity			10% - 90%

58 Additional information

Image 58

Contents SH940 Digital Projector Table of contents Important safety instructions Important safety instructions Avoid volatile liquids Moisture condensationDisposal Shipping contents OverviewRemote control operation Remote control batteriesCeiling mounting the projector Projector features Rear view Projector exterior viewFront and upper side view Under viewControls and functions Control panelRemote control Positioning your projector Choosing a locationObtaining a preferred projected image size Projection dimensions Installation for a 169 ratio screenScreen dimensions Projection distance D Lowest Highest Installation for a 43 ratio screenFloor Installation Ceiling Installation Screen aspect ratio is 43 and the projected picture isShifting the projection lens To use the lens shift leverConnecting Hdmi devices Connecting with video equipmentPreparations Connecting component-video/RGB devices Connecting video devicesConnecting a computer Connecting a monitorTurning the projector on Using the projectorPreparations Selecting an input source Using the OSD menuChanging Color Space Using a security cable lock Using the menusSecuring the projector Setting a password Utilizing the password functionIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Auto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityCorrecting picture distortion Fine-tuning the selected picture mode Using the preset and user modesSelecting a preset mode To fine-tune the picture modeTo reset the picture mode to the preset factory values Setting the User 1/User 2 modeResetting the picture mode Renaming user modesFine-tuning the picture quality Advanced picture quality controls Setting Black LevelSelecting a color temperature Controlling image clarityAdjusting Brilliant Color Setting a preferred color temperatureSelecting a Gamma setting To set a preferred color temperatureSetting Film Mode Color ManagementSelecting the aspect ratio Setting 3D Comb FilterAbout the aspect ratio Using Panamorph lenses optional Hiding the image Freezing the imageTurning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound quality Muting the soundControlling the projector remotely through a web browser Configuring the Lan Control SettingsControlling the projector through a Lan environment If you are in a Dhcp environmentEnter To activate High Altitude Mode Operating in a high altitude environmentDisplaying more than one image source simultaneously To display the PIP windowPower II or OFF again Turning the projector offPicture On-Screen Display OSD menusOn-Screen Display OSD structure BasicDisplay SetupSystem Information Resolution DhcpReset Picture Picture ModeLoad Settings SettingsBlank Timer AdjustmentYPbPr Tuning Display menuLanguage System Setup menuMenu Settings Splash ScreenStandby Monitor Closed Caption EnableClosed Caption OutHdmi Settings Advanced Setup menuLamp Settings Audio SettingsSource ResolutionInformation menu Equivalent LampAdditional information Care of the projectorLamp information Setting Lamp Power as EconomicSetting Auto Power Off Getting to know the lamp hourReplacing the lamp Timing of replacing the lampStatus Message English Resetting the lamp timer Power events IndicatorsLight Status & Description Troubleshooting Problem Cause RemedyOptical SpecificationsGeneral characteristics ElectricalDimensions Ceiling mount installationFormat Timing chartSupported timing for PC input Refresh rateSupported timing for Hdmi Hdcp input Format Resolution Refresh rate Hz Freq. KHz Pixel Freq. MHzFormat Resolution Refresh rate Freq. KHz Pixel Freq MHz Supported timing for Edtv and Hdtv via Component inputsCopyright Warranty and Copyright informationWarranty Disclaimer