BenQ PE8700 User’s Manual
4. Basic Operation
Turning the Power on
■The Power LED shines orange when power is applied and the power switch is in the on position.
■Press and hold the ON key on the remote control or the STANDBY/ON key on the projector for ONE second to turn the projector on. The POWER LED will flash orange while warming up, then show a steady green.
■" Searching…." will be displayed on the screen
before the projector identifies the input signal. This message will remain on the screen until a valid signal is detected.
■If the horizontal frequency of the input signal
exceeds the range of the projector (XGA), a message reading " Not supportive timing " will be displayed on the screen. This message will remain
Zoom/Focusing
■Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens.
Focus
Zoom out |
|
|
|
|
|
|
| Zoom in |
|
|
|
|
|
|
|
4. Basic Operation 15