BenQ PE8700 user manual Remote Control

❚Remote Control

V (VIDEO): Composite video signal input.

S-V (S-VIDEO):S-Video signal input.

CP (Component):

Component Y/CB/CR input.

CP HD (Component HD):

DTV Y/PB/PR signal input.

RGB HD: DTV RGBHV signal input.

PC (DVI): Computer and DVI signal input

DEFAULT

Restores the default settings for the current input source.

Memory 1 : Restores settings saved in memory 1

Memory 2 : Restores settings saved in memory 2

Memory 3 : Restores settings saved in memory 3

ARROW (c/e/d/f)

Used to select the menu or to make various adjustments.

ENTER

Enters the setting for items shown in the menu.

EXIT

Exits and saves the setting(s) of items in the menu.

MENU

Turns the on-screen display control menu on or off.

SCREEN c : Control the screen up directly. This function is only available for BENQ's accessory screen.

SCREEN d : Control the screen down directly. This function is only available for BENQ's accessory screen.

BenQ PE8700 User’s Manual

ON

Hold this button down for ONE second to turn the projector on.

OFF

Press this button to turn the projector off.

ANA (ANAMORPHIC): Expands an image with a 4:3 aspect ration linearly along the horizontal axis to provide full-screen display with a 16:9 aspect ration.

STANDARD (4:3): Displays the projected image with a 4: 3 aspect raion in the center of screen.

LB (Letterbox): Enlarges an image in letter box format to display in full-screen format with a 16:9 aspect ration with upper and lower portion cropped.

WIDE: Expands an image with a 4:3 aspect ratio NON-linearly along the horizontal axis to provide full screen display with a 16:9 aspect ratio.

THRO (Through): One- to-one mapping is performing without any scaling of the image. The image is displayed at the center of the screen.

+: Enlarges the size of the PIP window.

―: Shrinks the size of the PIP window.

PIP (Picture-in-Picture)

Enables the PIP function. Use the ARROW keys to adjust the position of the PIP window (Please see "PIP (Picture-In-Picture)/POP(Picture-On-Picture) functions" on page 18.)

ACTIVE: Switches to the active window in PIP display mode.

POP (Picture-on- picture)

Enables the POP function. ( Please see "PIP (Picture-In- Picture)/POP (Picture-On- Picture) functions" on page 18.)

LIGHT: Turns the backlight of the remote control on.

1. Overview 7