BenQ PE8700 User’s Manual
6. Additional Information
Warning Message
■It is normal for illumination from the lamp to dim somewhat when the projector has been used for a
period of time. |
| Lamplife is expired! | |
■ The message "Lamplife is expired ! Please change a |
| Please change new lamp | |
new lamp. And reset the lamp timer." will be |
| And reset the lamp timer | |
displayed for 30 seconds on the screen when the |
| ||
|
|
| |
lamp has been in use for 1950 hours. |
|
|
|
|
|
|
|
|
|
|
|
■ The message " Please change the lamp, Lamp will |
|
|
|
|
|
| |
exceed its lifetime after (hours): " will be displayed |
| Please change the lamp! |
|
on the screen for 30 seconds each time the |
|
| |
| Lamp will exceed its |
| |
projector is turned on after the lamp has been in |
|
| |
use for 1980 hours. The number of hours will be |
| lifetime after (hours): |
|
updated. |
|
|
|
|
|
|
|
|
|
|
|
■ The message " Please change the lamp ! " will be |
|
|
|
|
|
| |
displayed on the screen continuously and the |
|
|
|
POWER LED will flash orange and green |
| Please change the lamp! |
|
sequentially if the lamp has been in use for more |
|
| |
than 2,000 hours. |
|
|
|
■ The projector will turn off automatically after 10 |
|
|
|
minutes. |
|
|
|
|
|
|
|
Replace the Lamp
1. Loosen the screws | 2. Remove the front lamp |
on the front lamp | cover. |
cover. |
|
3. | Loosen the three | 5. | Loosen the two screws |
| screws on the lamp |
| on the lamp module. |
| shield. |
|
|
|
| 6. | Pull out the lamp |
4. | Take off the lamp |
| module horizontally. |
| shield. |
|
|
7. | Insert the new lamp | 9. | Put on the lamp shield. |
| module into the |
|
|
| projector | 10. | Tighten the three |
| horizontally until it |
| screws on the lamp |
| is securely in place. |
| shield. |
8. | Tighten the two |
|
|
| screws on the lamp |
|
|
| module. |
|
|
246. Additional Information