Display Menu

BenQ PE8700 User’s Manual

3.COLOR: Adjusts the color intensity to values between 0 and 60. The higher the value, the more intense the color.

4.SHARPNESS: Adjusts the picture sharpness to values between -10 and +10. The higher the value, the sharper the picture.

5.TINT: Adjusts the color tones to values between 0 and 30. The higher the value, the more green-toned the picture becomes. The lower the value, the more purplish the picture becomes.

6.COLOR TEMP.: Adjusts the color temperature.

■0 : The default color temperature of the lamp.

■1 : Low color temperature (6500°K). Makes white appear reddish.

■2 : Middle color temperature (7500°K). Maintains normal colorings for white.

■3 : High color temperature (9300°K). Makes white bluish.

7.FILTERS: Turn the video filters on or off. Filters can reduce noise in the picture to produce a sharper image. There are four filters for video input (0 ~ 3) and two filters for graphic input (0 ~ 1). The higher the setting, the less the noise.

8.RED: Adjusts red hues independently to values between 0 and 30. The higher the setting, the greater the intensity of red hues.

9.GREEN: Adjusts green hues independently to values between 0 and 30. The higher the setting, the greater the intensity of green hues.

10.BLUE: Adjusts blue hues independently to values between 0 and 30.The higher the setting, the greater the intensity of blue hues.

11.YELLOW: Adjusts yellow hues independently to values between 0 and 30. The higher the setting, the greater the intensity of yellow hues.

In this menu, you can set the way the projector displays the picture.

There are five items in this menu: SOURCE — ASPECT — PC&HDTV — SAVE — LOAD.

1.SOURCE: Selects the input source.

■VIDEO: Composite video signal input.

■S-VIDEO: S-Video signal input

■COMPONENT: Component Y/CB/CR input

■COMP - HD: DTV Y/PB/PR input

■RGB - HD: DTV RGBHV signal input

205. Menus