Displaying more than one image source simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which can be used to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly connected to the projector.
•Using the OSD menu
1.Press MENU/EXIT and then press 
/ 
until the DISPLAY menu is highlighted.
2.Press 
to highlight PIP and press MODE/ ENTER. The PIP page displays.
3.Highlight PIP and press 
/ 
to select On.
The projector will select two currently active signals to display and the last viewed picture will be displayed on the big screen as a main source.
The PIP function is effective at below source combinations.
| Source 2 |
|
|
Source 1 | HDMI |
|
|
Component | V |
|
|
PC | V |
|
|
Video | V |
|
|
V | |
|
|
4.To change the Main Source or Second Source, press 
to highlight Main Source or Second Source, use 
/ 
to highlight the source you want to display for the main (bigger) or second (smaller) window.
5.To make OSD settings to one of the two sources (main or second), highlight Active Window and press 
/ 
to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window.
6.To change the position of the smaller picture, highlight Position and press 
/ 
repeatedly until a suitable position is selected.
7.To resize the small picture, highlight Size and press 
/ 
to set the PIP size among Small or Large
8.To leave the OSD menu, press MENU/EXIT repeatedly until the menu disappears.
Personalizing the projector menu display
The