English
28
User Password
•Press 
to set up or change "User Password".
•Use the numerical keys on the remote control to set the password and press "MENU" to confirm.
•To delete the digits, Press 
.
•Enter the password again when you see "Confirm Password" displayed.
•The password should be 4~8 digits in length.
•If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.
•If you select "Always request password while projector turns on", you are requested to input the password every time the projector is turned on.
Administrator Password
You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box is displayed.
•Press 
to change "Administrator Password".
•The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following to retrieve the administrator password:
•Enter the unique
•If the Security Card is lost, please contact your local Acer
service center.
Lock User Startup Screen
•The default value is "Off". If it is "On", you cannot change the startup screen arbitrarily.
| Selecting "On" enables the function. The projector can output |
| a VGA signal when it is in standby mode and the VGA IN (or |
| VGA IN 1) and VGA OUT sockets are correctly connected to the |
VGA OUT | devices. |
| |
| Enabling this function slightly increases the standby |
| power consumption. |