English
24
Adjusts the sharpness of the image.
Sharpness | • | Press | to decrease the sharpness. | |
| • | Press | to increase the sharpness. | |
|
|
|
| |
H. Position | • | Press | to move the image left. | |
(Horizontal | • |
|
| |
Position) | Press | to move the image right. | ||
|
|
|
| |
V. Position | • | Press | to move the image down. | |
(Vertical | • |
|
| |
Position) | Press | to move the image up. | ||
|
| |||
| Changes the projector’s refresh rate to match the frequency | |||
Frequency | of your computer’s graphics card. If you experience a vertical | |||
flickering bar in the projected image, use this function to | ||||
| ||||
| correct it. |
| ||
|
| |||
| Synchronizes the signal timing of the display with the graphics | |||
Tracking | card. If you experience an unstable or flickering image, use | |||
| this function to correct it. | |||
|
| |||
| Adjusts the overscan ratio of the HDMI image on screen. | |||
| • | Auto: Automatically adjusts the overscan ratio by | ||
HDMI Scan Info |
| information from the player. | ||
| • | Underscan: Always no overscan on the HDMI image. | ||
| • | Overscan: Always keep overscan on the HDMI image. | ||
|
| |||
| Choose "On" to enable DLP 3D function. | |||
| • | DLP 3D |
| |
| Select this item while using DLP 3D glasses, quad buffer | |||
3D | (NVIDIA/ATI...) graphics card and HQFS format file or DVD | |||
| with corresponding SW player. | |||
| • | Off |
| |
| Turns off 3D mode. | |||
|
| |||
| If you see a discrete or overlapping image while wearing DLP | |||
3D Sync Invert | 3D glasses, you may need to execute "Invert" to get best | |||
match of left/right image sequence to get the correct image | ||||
| ||||
| (for DLP 3D). |
| ||
|
| |||
| Choose "On" to display the 3D warning message. | |||
3D Warning |
|
|
| |
Message |
|
|
| |