Acer 65PE specifications Specifications5, Optical, Electrical, Mechanical

Page 30

Specifications5

A Optical

DMD TM

1-chip 0.7” DMDTM (Digital Micromirror Device)

Lens

Manual

zoom ,manual focus

 

(F=2.8

to

3.1

f=31 to 40)

Lamp

mercury lamp

150W

 

Image size 25” to

300”

 

Projection Distance

1.5

to 14 M

Light Output 800

ANSI lumens

Contrast Ratio 450:1

 

 

B Electrical

Inputs RGB(H:31.47 to

68.70 kHz

V:56.25 to 85.00 Hz)

Video (NTSC/PAL/SECAM/NTSC 4.43)

 

Color Reproduction

Full color,

16.7 million colors simultaneously.

Power Requirement 100

to 240 VAC, 50 to 60 Hz

C Mechanical

Dimensions 24.3 cm (L) 6.2 cm (H) 19.8 cm (W)

Net Weight 2.3 kg/5.0 lb.

Operational Temperature projector: 10 to 40

Remote control

English 26

Image 30
Contents PalmPro 7763P/65PE Fill this English Table of Contents Introduction Description Ceiling Mount and Rear Screen ProjectionAV box Front figureInstallation Bottom figurePositioning Adjustable Feet Moving the ProjectorAccessories Moving the projectorAccessories of 7763P/65PE Connecting the Projector to Computer/Notebook ConnectionConnecting the Projector to Macintosh/Power Book Connection to MacintoshStandby Power onOperation Control PadMenu Indicator StatusIndicator ExitRemote Control Usage and Replacement of Lamp Light source lamp has a limited service lifeLamp/temperature Status LED Indicator Lamp in excess of service hoursLamp is not well attached Temperature is too highReplacing the Lamp Normal statusEnglish Lamp Replacement Procedure StepResetting Lamp Timer Main OSD MenuDisplay Image Control Image RatioTint Blank Auto Off Reset SourceOther Correspondent Remote Functions and Messages English Cleaning the Lens Maintenance TroubleshootingLamp Replacement TroubleshootingStand within 4 meters 13 feet of the unit Adjust audio sourcePress Volume + button Make sure nothing is blocking the receiver onElectrical Specifications5Optical MechanicalPreset Display Resolution Table 70.1Appendix Volume upVolume Down AV Connection PortConnecting the Box Please follow the instruction here to place the AV box