Acer 65PE specifications Bottom figure, Installation, Positioning

Page 7

Figure 2 Rear view of 7763P/65PE

C BOTTOM (figure)

Figure 3 Bottom view of 7763P/65PE

Installation

A.Positioning

•

•

•

This projector is basically designed to project on a flat projection surface.

This projector can be focused from 1.5m–14m.

Refer to the figure below to adjust the screen size.

English 3

Image 7

Contents PalmPro 7763P/65PE Fill this English Table of Contents Introduction Front figure Ceiling Mount and Rear Screen ProjectionAV box DescriptionBottom figure InstallationPositioning Moving the Projector Adjustable FeetMoving the projector AccessoriesAccessories of 7763P/65PE Connection Connecting the Projector to Computer/NotebookConnection to Macintosh Connecting the Projector to Macintosh/Power BookControl Pad Power onOperation StandbyExit Indicator StatusIndicator MenuRemote Control Light source lamp has a limited service life Usage and Replacement of LampLamp in excess of service hours Lamp/temperature Status LED IndicatorNormal status Temperature is too highReplacing the Lamp Lamp is not well attachedEnglish Step Lamp Replacement ProcedureMain OSD Menu Resetting Lamp TimerDisplay Image Image Ratio ControlTint Source Blank Auto Off ResetOther Correspondent Remote Functions and Messages English Troubleshooting Maintenance TroubleshootingLamp Replacement Cleaning the LensMake sure nothing is blocking the receiver on Adjust audio sourcePress Volume + button Stand within 4 meters 13 feet of the unitMechanical Specifications5Optical Electrical70.1 Preset Display Resolution TableAV Connection Port Volume upVolume Down AppendixPlease follow the instruction here to place the AV box Connecting the Box