Acer 65PE specifications Control, Image Ratio, Tint

Page 24

H.Posit ion

V. Positio n

(move

the

image

left)

(move

the image right)

 

 

The Auto Image should be turned off to activate the H. Position item. Position adjustments are saved when the projector is power off.

(move

the

image

down)

(move

the image up)

 

 

Position adjustments are saved when the projector is power off.

Image Ratio

4:3 (Normal)

16:9 (Wide)

System To select the input video system standard. When an AV box or turner box is attached, the projector will automatically detect the video system. Users also can select desired video systems. When selecting system, the projector will detect the selected system simultaneously, and the OSD will still exit on the screen. The default setting of System is “Auto” (See Figure 29).

Color

(Less)

(More)

Tint

(Red)

(Green)

Source is Video

 

 

 

or S-Video

*Tint may not be adjusted with PAL/SECAM video signal input.

C Control Page

When users go into the Control sub-page, the first item, “Language,” will be highlighted. There are five items on this page: Language, Mirror, Blank, Auto Off, and Reset (Fig. 25).

Figure 25 Control sub-page

Setting effects

Language To select the OSD menu language. Eight languages are supported: English, French, German, Italian, Spanish, Swedish and Dutch. (See Figure 25).

English 20

Image 24
Contents PalmPro 7763P/65PE Fill this English Table of Contents Introduction Ceiling Mount and Rear Screen Projection AV boxDescription Front figureInstallation Bottom figurePositioning Adjustable Feet Moving the ProjectorAccessories Moving the projectorAccessories of 7763P/65PE Connecting the Projector to Computer/Notebook ConnectionConnecting the Projector to Macintosh/Power Book Connection to MacintoshPower on OperationStandby Control PadIndicator Status IndicatorMenu ExitRemote Control Usage and Replacement of Lamp Light source lamp has a limited service lifeLamp/temperature Status LED Indicator Lamp in excess of service hoursTemperature is too high Replacing the LampLamp is not well attached Normal statusEnglish Lamp Replacement Procedure StepResetting Lamp Timer Main OSD MenuDisplay Image Control Image RatioTint Blank Auto Off Reset SourceOther Correspondent Remote Functions and Messages English Maintenance Troubleshooting Lamp ReplacementCleaning the Lens TroubleshootingAdjust audio source Press Volume + buttonStand within 4 meters 13 feet of the unit Make sure nothing is blocking the receiver onSpecifications5 OpticalElectrical MechanicalPreset Display Resolution Table 70.1Volume up Volume DownAppendix AV Connection PortConnecting the Box Please follow the instruction here to place the AV box