Appendices
Problem: The image is outstretched when displaying DVD.
Select appropriate aspect ratio in both DVD player and projector OSD menu to get the correct
If the image is still outstretched, you will also need to adjust the aspect ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio on screen menu.
Problem: Image is reversed.
Select “Image” from the OSD and adjust the projection direction. See page 22.
Problem: Lamp burns out or makes a popping sound.
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”.
See page 39.
Problem: LED lighting message.
Message | Power LED | Temp LED | Lamp LED | ||
Red | Blue | ||||
|
|
| |||
Standby State | Slow Flashing |
|
|
| |
(Input power cord) |
|
|
| ||
|
|
|
| ||
Lamp lighting |
|
|
|
| |
Power on |
|
|
|
| |
Power off (Cooling) | Quick Flashing |
|
|
| |
Error (Lamp fail) |
|
|
|
| |
Error (Thermal fail) |
|
|
|
| |
Error (Fan lock fail) |
|
| Flashing |
| |
Error (Over Temp.) |
|
|
|
| |
Error |
|
|
|
| |
(Lamp Breakdown) |
|
|
|
| |
=>Light On | =>Light Off |
|
| ||
37 ... English