User Controls
Management
(Computer / Video
Mode)
Lamp Hour Elapse
Displays Hour the lamp’s elapsed operating time (in hours).
Lamp Reminding
Choose this function to show or to hide warning message when the changing lamp message is displayed. The message will show up 30
hours before end of life.
Lamp Hour Reset
Press the 
and then choose “Yes“ to turn the lamp hour counter to 0 hours.
Security
Press 
to start “Security” setting. If the “Security” function is enabled, your must enter ¡§Administrator Password¡¨ first before Security setting.
Security
This projector provides an excellent security function for the administrator to manage the usage of the projector request. 
Select “On” to enable the security function. User have to enter password depending on the “ Security Mode”. Please
refer to “User Password” section for details.
Select “Off” then user can switch on the projector without password.
Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both “User Password” and “Administrator Password” can be accepted for this dialogue.
English...28