User Controls
On-Screen Display Menus
The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source.
How to operate
NOTE
“Saturation” and “Tint” functions are not supported under computer modeorDVImode.
1.To open the OSD menu, press “Menu” on the Remote Control or press “Menu”on the Control Panel.
2.When OSD is displayed, use 
keys to select any item in the main menu. After selecting the desired main menu item, press 
to enter sub menu for feature setting.
3.Use 
keys to select the desired item and adjust the settings
by 
key.
4.Select the next item to be adjusted in the sub menu and adjust as described above.
5.Press “Back” on the Remote Control or press “Menu”on the Control Panel, the screen will return to the main menu.
6.To exit OSD, press “Menu” on the Remote Control or press “Menu ”on the Control Panel again. The OSD menu will close and the projector will automatically save the new settings.
Main Menu 
Sub Menu
Setting
19 ... English