User Controls
Image
(Video Mode)
Keystone
Adjust image distortion caused by tilting projection. ( 
15 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
Auto : Keep the image with original
16:9 : The input source will be scaled to fit the width of the screen.
4:3 : The input source will be scaled to fit the projection screen.
480p : Crop a 480p video signal to 800x480 resolution (for SVGA model).
Projection
The factory default setting.
Rear-Desktop
When you select this function, the projector reverses the image so you can project behind a translucent screen.
Front-Ceiling
When you select this function, the projector turns the image upside down for
Rear-Ceiling
When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling
mounted projection.
Sharpness
Adjusts the sharpness of the image.
Press the 
to decrease the sharpness.
Press the 
to increase the sharpness.
English...24