Onkyo HT-R640 instruction manual Video Input, Hdmi Video Setup

Page 40

First Time Setup—Continued

Video Input

HDMI Video Setup

If you connect a video component to HDMI IN 1 or 2, you must assign that input to an input selector. For exam- ple, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

Note:

When HDMI IN 1 or 2 is assigned to an input selector here, the digital audio input for that selector is automat- ically set to HDMI IN 1 or 2. If you specify this setting as “No,” be sure to conﬁrm that Digital Input is properly set to select an input you desire. See “Digital Input” on page 39.

1		Press the [RECEIVER] or [AMP]
		Press the [RECEIVER] or [AMP]
		button followed by the [SETUP]
AMP	RECEIVER	button.
		button.
		The main menu appears onscreen.

	SETUP
2	Use the Up and Down [ ]/[ ]
	buttons to select “0. Video Input,”
	and then press [ENTER].
	The Video Input menu appears.
	0.Video Input
	------------------------
	Component Video
	a.DVD	: IN1
	b.VIDEO1	: ---
	c.VIDEO2	: ---
	d.VIDEO3	: ---
	HDMI
	e.DVD	: IN1
	f.VIDEO1	: No
	g.VIDEO2	: No
	h.VIDEO3	: No

3	Use the Up and Down [ ]/[ ]
	buttons to select an input selec-
	tor, and use the Left and Right
	[ ]/[ ] buttons to select:
	0.Video Input
	------------------------
	Component Video
	a.DVD	: IN1
	b.VIDEO1	: ---
	c.VIDEO2	: ---
	d.VIDEO3	: ---
	HDMI
	e.DVD	: IN1
	f.VIDEO1	: No
	g.VIDEO2	: No
	h.VIDEO3	: No

IN1: Select if the video component is connected to HDMI IN 1.

IN2: Select if the video component is connected to HDMI IN 2.

No: Select when not using the HDMI output.

4	Press the [SETUP] button.
	Press the [SETUP] button.
	The setup menu closes.
SETUP

40

Image 40

Contents HT-R640 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserSupplied Accessories PrecautionsMake sure you have the following accessories Speaker cable labels Not North American models Hdmi cableFeatures AmpliﬁerAudio/Video FM/AM/XM TunerTable of Contents Front & Rear Panels Front PanelFront & Rear Panels Display Rear Panel Digital Optical in 1, 2, 3 and OUTXM antenna on North American models Hdmi in 1, 2, and OUTTape IN/OUT Installing the Batteries Remote ControllerAiming the Remote Controller Using the Remote Controller Remote ControllerRECEIVER/AMP/TAPE Mode or AMP/TAPE Mode Remote Mode buttons Buttons used when the Tuner input is selectedButtons used when the Tape input is selected Multi CH buttonDVD Mode CD/MD/CDR/HDD Mode To select the input source, pressDISC/ALBUM +/- button Arrow Enter buttonsAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 15 mm Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown North American modelsConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Connecting Both Audio & Video Which Connections Should I Use?Video Connection Formats Audio Connection FormatsConnecting Your TV or Projector Video ConnectionAudio Connection HintConnecting a DVD Player Hooking Up the Multichannel DVD Input DVD playerConnecting a VCR or DVD Recorder for Playback DVD recorderConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Camcorder, Games Console, or Other Device Connecting Components with Hdmi About HdmiSupported Audio Formats About Copyright ProtectionAudio Signal Flow Chart Video Signal Flow ChartMaking Hdmi Connections CD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntablePhono Preamp MC head amp or MC transformer For HDD-compatible components that support video Connecting a HDD-compatible ComponentFor HDD-compatible components that don’t support video Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting Onkyo Components Connecting the Power Cord of Another ComponentAuto Power On/Standby Remote ControlConnecting the Power Cord Turning On the AV ReceiverTurning On and Standby Smooth Operation in a Few Easy StepsFirst Time Setup About the Onscreen Setup MenusSubmenus Main menuFirst Time Setup Digital InputHdmi Video Setup Video InputComponent Video Setup Video 4 is ﬁxed toIN1 Use the video component Connected to CompoSpeaker Conﬁguration Speaker Conﬁg menu appearsTesting the Speakers Press the remote controller’s Test Tone but- tonLow-Pass Filter for the LFE Channel Double BassTV Format Setup Not North American models Changing the Input DisplayBasic Operations Selecting the Input SourceStart playback on the source component Video OUT, Hdmi OUT or Monitor OUTUsing the Multichannel DVD Input Adjusting the Bass & TrebleBasic Operations Displaying Source InformationUsing the Sleep Timer Setting the Display BrightnessUsing Headphones Muting the AV ReceiverUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting AM/FM Stations XM Channels Selecting PresetsDeleting Presets Listening to the RadioWhat is RDS? Using RDS European models onlyRDS Program Types PTY Listening to Trafﬁc News TP Displaying Radio Text RTFinding Stations by Type PTY Connecting the XM Passport System Listening to XM Satellite Radio North American models onlyImportant XM Radio Information About XM RadioSigning Up for XM Satellite Radio Setting the Satellite Radio ModeSelecting XM Satellite Radio Channel Search mode select any channel Selecting XM Radio ChannelsPress the Receiver button Followed by the D TUN buttonDisplaying XM Radio Information XM Radio Messages Positioning the XM Passport SystemUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV ReceiverUsing the Listening Modes PCMUse this mode with any stereo movie e.g., TV, DVD, VHS About the Listening ModesOnkyo Original DSP Modes AV Recording RecordingRecording Separate AV Sources Using the CinemaFILTER Using the Late Night Function Dolby Digital onlyAdjusting Individual Speaker Levels Using the Audyssey EQ North American models onlyAdvanced Setup Advanced Speaker SettingsSpeaker Distance Tance, and then press EnterAdvanced Setup Repeat until the volumeSpeaker Level Calibration Test tone from each speakerMultichannel DVD Input Settings Audio Adjust FunctionsWhen you’ve ﬁnished, press SW Input SensitivityInput Channel Settings PL II Music Mode SettingsNeo6 Music Mode Setting Listening SettingTons on the remote controller to Assigning Listening Modes to Input SourcesUse the Input Selector but Select the input source that youIntelliVolume Volume Setup/OSD SetupUse the Up and Down Buttons to select a. IntelliVolume Miscellaneous Setup,Changing the AV Receiver’s ID Hdmi Audio OutLock Setup Digital Input Signal FormatsPress and hold the AV receiver’s Digi TAL Input button for about 3 secondsCorrecting Sound and Picture Sync Changing the Remote Controller’s IDReceiver or AMP button lights up Entering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL CH +Speciﬁcations Ampliﬁer SectionVideo Section Tuner SectionTroubleshooting Troubleshooting Remote controller doesn’t work Sound changes when I connect my head- phonesCan’t control other components Can’t recordVideo Attenuation Video ATT0 defaultVideo ATT2 Gain is reduced by 2 dB Onkyo Europe Electronics GmbH Onkyo Europe UK Office