1200 and 1400 Series iSCSI Disk ArraysConfiguring iSCSI targets en 23
4 | Configuring iSCSI targets | ||
| The disks you create by using iSCSI Software Target are iSCSI virtual disks, which are files in | ||
| the fixed virtual hard disk (VHD) format. | ||
| You must perform the following tasks to configure your iSCSI targets: | ||
| – | Section 4.1 | Creating an iSCSI target, page 23 |
| – | Section 4.2 | Creating a simple volume, page 24 |
| – | Section 4.3 | Creating a virtual disk, page 26 |
| – | Section 4.4 | Modifying iSCSI LUN settings, page 27 |
4.1 | Creating an iSCSI target | ||
| 1. | Click Start and click Server Manager. | |
| 2. | Expand Storage, expand Microsoft iSCSI Software Target, and then click iSCSI Targets. | |
| 3. |
| |
The Create iSCSI Target Wizard dialog box is displayed.
4.Click Next>.
5.In the iSCSI target name field, type the desired name.
–Type a description of the new iSCSI target if desired.
–Click Next>.
6.In the IQN identifier field type *.
Bosch Sicherheitssysteme GmbH | Software Manual | Doc V1 2010.09 |