Transmitter
Receiver
The Projection Link System
ProjectionLink includes two components: a Transmitter (PL-300T) and a Receiver (PL-300R). The Transmitter is con- nected to your computer or other source and the Receiver is connected to your projector.
This Installation Guide shows you how to configure Projec- tionLink. This Installation Guide does not explain how to install ceiling mount projectors or how to pull cable, etc. Use the suggestions in this Installation Guide to help configure your projector with the ProjectionLink system.
The ProjectionLink Transmitter (PL-300T) should be located somewhere in your conference room or boardroom. The Transmitter allows you to connect multiple input sources to your projector via CAT-5 cabling. Typically, the Transmitter is located under your conference table or inside a podium at the front of a room. This is the connection point for your input devices (computers, video, and audio devices) and your installed projector.
2 | ProjectionLink User & Installation Guide |
