Proxima ASA PL-300, BNDL-001 Understanding ProjectionLink System, Your ProjectionLink system will

Understanding the ProjectionLink System

Understanding the

ProjectionLink System

The ProjectionLink system offers many advantages over previ- ous mounted projection systems. It also has a few limitations you should be aware of. The following tables lists some fea- tures the ProjectionLink system can and cannot do:

Your ProjectionLink system will:

Eliminate the need for expensive coaxial cables and amplifiers

Conveniently switch between presentation devices (e.g., com- puter to video)

Reduce installation time

Allow RS-232 control from external control systems such as

Crestron or AMX/Panja

Easily connect your installed projector to your presentation devices

Your ProjectionLink system will not:

Facilitate high-bandwidth appli- cations (greater than 140 MHz)

Replace a matrix switcher

Replace a distribution amplifier

Encode or decode video signals

Accept multiple video signals on each video input

Increase the number of com- puter and/or video inputs on your projector

Support Picture-in-Picture since only one video signal at a time is sent to the projector

Accept HDTV component (Y, Pb, Pr) video

4 ProjectionLink User & Installation Guide