For Customers in the United Kingdom
THIS PRODUCT IS SUPPLIED WITH A
IMPORTANT FOR THE UNITED KINGDOM
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visibe on the pin face of the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. if the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.
WARNING: THIS EQUIPMENT MUST BE EARTH GROUNDED
Important:
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow = Earth
Blue = Neutral
Brown = Live
Green & Yellow to Earth 
Brown to Live
Fuse
Blue to Neutral 
Cord Clamp
As these colours may notorrespond with the colured markings identifying the terminals in your plug, proceed as follows:
1.The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Green and Yellow.
2.The wire coloured Blue must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
3.The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
2