Proxima ASA DP5800 specifications Safety Precautions

Page 4
Pull out the power plug from the power outlet.

Safety Precautions

Warnings

If any unusual performance occurs.

An abnormal smell or smoke may indicate the possibility of fire or electric shock, etc. When any unusual performance is observed, immediately turn off the power switch and pull out the power plug from the power outlet. Check that there is no smoke, etc., and then contact your dealer to repair the unit. Do not repair it yourself .

Do not use this unit as it is after trouble has occurred, such as “No

Do not apply any shock.

If you drop this unit or if the cabinet is broken, turn off the power switch, disconnect the power plug and contact your dealer. If you use it as it is, it may cause a fire, electric

shock, etc.

Pull out the power plug from the power outlet.

picture”,“No sound”, “Abnormal sound”, etc. This may cause a fire, electric shock, etc. In this case immediately turn off the power switch and disconnect the power plug, then contact your dealer to repair the unit.

If water, etc. enters inside the unit, turn off the power switch of the unit first and then disconnect the power plug and contact your dealer. If you use it as it is, it may cause fire, electric shock, etc.

Do not install this unit in an unstable place.

Avoid placing the projector in an unstable place such as weak base, inclined floor, etc. This may cause it to drop or fall over, resulting in injury.

Do not open the cabinet.

There are high voltage parts inside the cabinet which may cause electric shock. Ask your dealer to check inside and adjust and repair the unit.

Electric

Prohibition

shock

of disassembly

hazard

 

Do not use the projector near water.

Do not use this unit in a kitchen,

 

bathroom, etc. This may cause a

Do not use

fire, electric shock, etc.

near water

Do not look directly at the lens when the lamp is lit.

Since a strong light is used, it could damage your vision, etc. Pay special attention if children are present.

Do not modify this unit.

Do not modify this unit. It may cause a fire, electric shock, etc.

Prohibition

of disassembly

Do not put a container, etc. with liquid on this unit.

Do not put a vase, flowerpot, cosmetic container, medicine or water or small metal objects on this unit. If liquid spills and enter inside the unit, it may cause a fire, electric shock, etc.

Do not use power supplies other than those specified.

Do not use this unit with a power voltage other than those specified. It may cause a fire, electric shock, etc.

Be careful in handling the power cord.

Do not scratch or damage or bend the power cord. Do not put a heavy object on it, heat it or pull it. If you do, the power cord may be damaged and it may cause a fire, electric shock, etc.

Do not rest the projector on the power cord. The power cord may be damaged and it may cause a fire, electric shock, etc, be sure that heavy objects are not put on it.

If the cord is damaged (core wire is exposed,

disconnected, etc.), ask your dealer to replace it. It may cause a fire, electric shock, etc.

Check that no dirt adheres to the power plug and fully insert it without any play. If dirt adheres or the connection is incomplete, it may cause a fire, electric shock, etc.

Do not insert any foreign object.

Do not insert a metal or flammable object inside the ventilation holes or other openings. This may cause a fire, electric shock, etc.

If foreign matter enters the case, turn the power switch off and disconnect the power plug from the power outlet and contact your dealer. If you use as it is, it may cause a fire, electric shock, etc. Be especially careful if children could touch the unit.

Pull out the power plug from the power outlet.

4

Image 4
Contents DP5800 Features 5 8 0For Customers in the United Kingdom Important for the United KingdomSymbols Used in This Guide Video signal cablesPower cord Video inputsSafety Precautions Clean inside the unit every 24 months CleaningHandle the power cord carefully Do not place this unit where it gets hotYour DP5800 Projector Control use Installation Projector and screen setupUsing the foot adjusters Top view Side viewUsing the Projector Projecting the pictureTurning off the power Press and hold the STANDBY/ON button for 1 secondProjector Messages and Indicators MessageUsing the Menus Storing your settingsSET UP Menu E m RangeImage Menu Input MenuOptions Adjustment Details of adjustment OPT. Options MenuAdjustment Item Details of adjustment LanguageConnecting to a Video Source Connecting to an RGB SignalExample of computer signal VGA-3Initial signal settings Data HsyncControl terminal Connecting to a Control SignalMouse emulation PS/2 mouse ADB Mac mouse Serial mouse Control command codes Communication settingsControl command table Control data table Procedure for checking projector status Procedure for setting projector statusResetting the defaults Sample of command errorSystem Setup Typical system connectionsCleaning the air filter Lamp ReplacementTroubleshooting Problem Possible Cause ActionSpecifications Dimension diagramProxima Corporation Warranty and ServicingMain Office