Your DP5800 Projector
ON indicator
Blinks in Standby mode. Glows in operation mode. (See page 11.)
LAMP indicator |
Glows when the lamp |
should be replaced. |
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in
Standby mode.
TEMP Indicator
(See page 11.) | lamp |
FOCUS button | power |
temp
Glows when temperature inside the projector is too high. (See page 11.)
Adjusts focus. |
focus |
ZOOM buttons
zoom
Adjust picture size.
RESET button | MUTE button |
Resets unit to factory | reset | mute | |
settings. | |||
|
| ||
|
| menu |
INPUT button
MENU button
Picture adjustments. Refer to pages 12 − 16 for details.
Speaker
Input
To select the input source.
Each time this button is pressed, the input source is changed in sequence as shown below.
RGB1 
RGB2 
VIDEO1 
VIDEO2
Handle
Remote control sensor
Cooling fan | Lens | Remote control |
(exhaust) |
| sensor |
Cooling fan (intake)
The remote control will function within 16 feet of the projector sensor and within 30° to both the left and right.
VIDEO input terminal
(on
Mini DIN 4pin connector VIDEO input terminal
RCA Jack AUDIO L/R input terminal
RCA Jack
MAIN POWER switch
Main power ON/OFF switch.
|
| RGB IN |
R | RGB input terminal | |
|
|
RGB input terminal
| AUDIO | AUDIO | RGB output |
AC SW | IN | OUT | terminal |
|
| ||
|
| RGB OUT | |
| AC IN |
| RGB output terminal |
|
| ||
|
|
| |
|
| CONTROL |
|
|
|
| CONTROL terminal |
|
|
|
AC IN socket | AUDIO input | AUDIO output |
Connect the provided | terminal | terminal |
power cord. | Stereo mini jack | (RGB/VIDEO) |
| ||
|
| Stereo mini jack |
6