3M™ Digital Projector S55i/X55i
Multifunctional settings
Multifunctional
settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, and EASY MENU. EASY MENU cosists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.
MENU button ENTER button
POSITION
ENTER
|
|
| STANDBY/ON |
VIDEO | RGB | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MENU |
|
|
|
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
| END | PAGE DOWN | MUTE |
OFF |
|
FREEZE | KEYSTONE |
Cursor buttons 
ESC
RESET button
1. Press the MENU button on the remote control or one of the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
In the EASY MENU
2. If you want to change it to the Advanced MENU, select the "Go to Advanced Menu"
3. Use the cursor buttons ▲/▼ to select an item to operate.
4. Use the cursor buttons◄/► to operate the item.
In the Advanced MENU
2. Use the cursor buttons ▲/▼ to select a menu.
If you want to change it to the EASY MENU, select the
EASY MENU.
Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active.
| POSITION | MENU | |
RESET |
|
| |
|
| ENTER | |
| ESC | RESET | |
MENU [RGB] |
| :SELECT | |
PICTURE | BRIGHTNESS ＋0 | ||
IMAGE | CONTRAST ＋0 | ||
INPUT | GAMMA DEFAULT 1 | ||
SETUP | COLOR TEMP MIDDLE | ||
SCREEN | COLOR +0 | ||
OPTION | TINT +0 | ||
EASY MENU | SHARPNESS 3 | ||
| PROGRESSIVE TURN OFF | ||
| MY MEMORY SAVE 1 | ||
EASY MENU |
| ||
ASPECT 4:3 | |||
KEYSTONE | +0 | ||
MODE |
| NORMAL | |
BRIGHTNESS | +0 | ||
+0 | |||
CONTRAST | |||
+0 | |||
COLOR |
| ||
| +0 | ||
TINT |
| ||
| 3 | ||
SHARPNESS | |||
| |||
WHISPER |
| NORMAL | |
MIRROR |
| NORMAL | |
RESET |
|
| |
FILTER TIME | 0h | ||
LANGUAGE | ENGLISH | ||
Go To Advance Menu... | |||
3. Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.
4. Use the cursor buttons▲/▼ to operate the item.
●When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
●In the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.
5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
●Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.
24 | © 3M 2005. All Rights Reserved. |