3M™ Digital Projector S55i/X55i
Multifunctional settings
EASY Menu
With the EASY MENU, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.
EASY MENU |
| |
ASPECT 4:3 | ||
KEYSTONE | +0 | |
MODE | NORMAL | |
BRIGHTNESS | +0 | |
+0 | ||
CONTRAST | ||
+0 | ||
COLOR | ||
+0 | ||
TINT | ||
3 | ||
SHARPNESS | ||
| ||
WHISPER | NORMAL | |
MIRROR | NORMAL | |
RESET |
| |
FILTER TIME | 0h | |
LANGUAGE | ENGLISH | |
Go To Advance Menu... | ||
Item | Description | |
ASPECT | Using the buttons ◄/► switches the mode for aspect ratio. | |
See the ASPECT item in the IMAGE menu (30). | ||
| ||
KEYSTONE | Using the buttons ◄/► corrects the keystone distortion. | |
See the item KEYSTONE of section SETUP menu. (21) | ||
| ||
| Using the buttons ◄/► switches the mode of picture type. The | |
| modes of picture type are combinations of a mode of GAMMA and | |
| a mode of COLOR TEMP. Choose a suitable mode according to the | |
| projected source. | |
| NORMAL CINEMA DYNAMIC | |
MODE | NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT) | |
| CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) | |
| DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) | |
| • When the combination of GAMMA and COLOR TEMP differs from | |
| ||
| is “CUSTOM”. Please refer to the GAMMA (27) and COLOR | |
| TEMP (28) items in the PICTURE menu. | |
| • When this function is performed, a certain extra such as a line may appear. | |
BRIGHTNESS | Using the buttons ◄/► adjusts the brightness. | |
See the item BRIGHTNESS in the PICTURE menu (27). | ||
| ||
CONTRAST | Using the buttons ◄/► adjusts the contrast. | |
See the item CONTRAST of section PICTURE menu (27). | ||
| ||
COLOR | Using the buttons ◄/► adjusts the strength of whole color. | |
See the COLOR item in the PICTURE menu (28). | ||
| ||
TINT | Using the buttons ◄/► adjusts the tint. | |
See the TINT item in the PICTURE menu (28). | ||
|
Using the buttons ◄/► adjusts the sharpness.
SHRPNESS | See the SHARPNESS item in the PICTURE menu (28). | |
• There may be some noise when an adjustment is made. This is | ||
| ||
| not a malfunction. | |
WHISPER | Using the buttons ◄/► turns off/on the whisper mode. | |
See the WHISPER item in the SETUP menu (34). | ||
|
© 3M 2005. All Rights Reserved. | 25 |