3M X55I manual

Page 44
44
© 3M 2005. All Rights Reserved.
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
3M™ Digital Projector S55i/X55i
Maintenance
Other care
WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.
• Do not put a container containing water, cleaner or chemicals near the projector.
• Do not use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
►Do not use cleaner or chemicals other than those listed below. ►Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling.
Page 43 Page 45
Image 44
Page 43 Page 45
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content About contents of package Part names ProjectorComponent Video ports 13CB/PB CR/PRMagnify Remote controlControl buttons Setting up Fastening the lens coverFor the model ArrangementFor the model S55i Adjusting the projectors elevator Using the Security Bar How to attachConnecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Audio L out Audio cable Examples of connection with a VCR/DVD playerAudio R out Connecting power supply Remote control Putting batteriesUsing the remote control Power on/off Turning on the powerTurning off the power STANDBY/ON PowerAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the position For an RGB signal  For a video signal or s-video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Multifunctional settings Using the menu functionEasy Menu Advanced MenuEasy Menu Reset Easy MenuMirror Filter TimePicture Menu GammaPicture Menu High  Middle  LOW  CustomColor Temp SecamTV  Film  Turn OFF ProgressiveLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Phase Image MenuOver Scan PositionAuto Adjust Image MenuSize ExecuteInput Menu Color SpaceVideo Format Frame LockInput Menu InformationAudio Setup MenuVolume Screen Menu Menu PositionOSD Bright Bright  DarkScreen Menu Start UPMyScreen MyScreen LockMessage No Input is DetectedReset  Cancel Option MenuAuto Search Auto OFFOption Menu Maintenance LampType number = Case of replacement by yourselfLamp Air filter Air filtre Page There is no input signal Internal temperature is risingRelated messages Is out of the response parameter range of this unitRegarding the indicator lamps Regarding the indicator lamps It is time to clean the air filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeSpecification RGB input Video inputAudio input Communication port Audio outputSpecifications 246mm 306mm 83mm 97mm 102mmPage Intended Use
Top Page Image Contents