3M™ Digital Projector S55i/X55i
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon | Cases not involving a machine defect | Reference | |
page | |||
|
| ||
|
|
| |
| The signal cables are not correctly connected. | 12,13 | |
| Correctly connect the audio cables. | ||
|
| ||
| The MUTE function is working. | 18 | |
| Restore the sound pressing the MUTE or VOLUME button | ||
Sound does not | on the remote control. |
| |
come out. | The volume is adjusted to an extremely low level. | 18 | |
| Adjust the volume to a higher level using the menu function | ||
| or the remote control. |
| |
| The AUDIO setting is not correct. | 34 | |
| Correctly set the AUDIO item in the SETUP menu. | ||
|
| ||
| The lens cap is attached. | 17 | |
| Remove the lens cover. | ||
|
| ||
| The signal cables are not correctly connected. | 12, 13 | |
| Correctly connect the connection cables. | ||
|
| ||
No pictures are | The brightness is adjusted to an extremely low level. |
| |
displayed. | Adjust BRIGHTNESS to a higher level using the menu | 25 | |
| function or the remote control. |
| |
| The computer cannot detect the projector as a plug |
| |
| and play monitor. | 11 | |
| Make sure that the computer can detect a plug and play | ||
|
| ||
| monitor using another plug and play monitor. |
| |
Video screen | The FREEZE function is working. | 22 | |
display freezes. | Press the FREEZE button to restore the screen to normal. | ||
| |||
Colors have a | Color settings are not correctly adjusted. | 25, 28, | |
Perform picture adjustments by changing the COLOR | |||
faded- out | TEMP, COLOR, TINT and/or COLOR SPACE settings, | 32 | |
appearance, or | using the menu functions. |
| |
Color tone is | COLOR SPACE setting is not suitable. | 32 | |
poor. | Change the COLOR SPACE setting to AUTO, RGB, | ||
| SMPTE240, REC709 or REC601. |
|
© 3M 2005. All Rights Reserved. | 49 |