3M MP8746, MP8747 manual Menu Navigation, Factory Default Setting

Section 4: Adjustments and Functions

Menu Navigation

MENUPOSITION

MENU SELECT

RESET

Figure 4.3 Menu Disk button on projector and Menu buttons from basic remote control transmitter

1.Press MENU DISK button on projector or remote control MENU buttons. On-screen menus are displayed on the projected image.

2.Select the menu to be adjusted by pressing the right or left arrows on the MENU DISK buttons or the remote control.

Selected Menu is then highlighted.

3.Select the menu item to be adjusted by pressing the up or down arrows on the MENU DISK button or on the remote control.

Highlighted items may be adjusted.

✔Note: Separate settings are provided for the VIDEO and RGB input terminals. Adjustments are saved after shutdown.

Press MENU SELECT on the remote control to view the full menu or just the selected menu item. When only the selected menu item is displayed, the other menu items are displayed by pressing the up or down arrows on the Menu buttons.

BRIGHT

Figure 4.4 Single Selected Menu Item.

Factory Default Setting:

To reset a single item from SETUP menu:		COLORTINTR
1.	Select the adjustment item (Bright, Contrast...).	COLORBALB
		BRIGHT
2.	Press the RESET button. Only the selected item	SHARPNESSCONTRAST

resets.

Figure 4.5 Default Settings

© 3M IPC 2000 3M™ Personal Projector MP8746/MP8747 19