3M MP8747, MP8746 manual Colorbalhtintsize, Setup Submenu

SETUPBRIGHT	INPUT		IMAGE	OPT.	SETUPCONTRASTBRIGHTINPUT			IMAGE	OPT.
Section 4: Adjustments and Functions					SHARPNESSCOLOR
CONTRASTV			121
SETUP Submenu		BR	80057		COLORBALHTINTSIZE		BR
COLORBALHHASPECTHPHASEPOSITSIZE
The SETUP sub-menu is used to adjust and move the image position. The projector will display either the
RGB (Figure 4.6) or Video (Figure 4.7) submenu, according to the input source being projected.
Figure 4.6 RGB signal input						Figure 4.7 Video signal input
Adjustment Item	Details of Adjustment				Freeze On	Magnify On		Both On
BRIGHT		Dark	Bright		Adjustable	Adjustable		Adjustable
(BRIGHTNESS)
CONTRAST		Lower	Higher		Adjustable	Adjustable		Adjustable
V.POSIT	Moves the picture up or down.*				Not Adjustable	Not Adjustable		Not Adjustable
(V.POSITION)
H.POSIT	Moves the picture left or right.*				Not Adjustable	Not Adjustable		Not Adjustable
(H.POSITION)
H.PHASE	Decreases the picture flicker.*				Not Adjustable	Adjustable		Not Adjustable
H.SIZE	Widens or Narrows the horizontal				Not Adjustable	Not Adjustable		Not Adjustable
	size of picture.*
SHARPNESS		Soft	Sharp		Not Adjustable	Adjustable		Not Adjustable
TINT		Red	Green		Not Adjustable	Adjustable		Not Adjustable
COLOR		Less	More		Not Adjustable	Adjustable		Not Adjustable
COLOR BAL R		Less red	More red		Adjustable	Adjustable		Adjustable
COLOR BAL B		Less blue	More blue		Adjustable	Adjustable		Adjustable
ASPECT	4:3, 4:3 small, 16:9				Not Adjustable	Not Adjustable		Not Adjustable

*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message “AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT., H.PHASE, and H. SIZE settings. Auto Sync can also be executed from the control panel key pad. Press and hold the RESET button, then press the INPUT button.

✔Note:

•TINT cannot be adjusted with a PAL or M-PAL video signal input.

•TINT, COLOR, and SHARPNESS cannot be adjusted with an RGB signal input.

•V. POSIT, H. POSIT, H. PHASE, and H. SIZE cannot be adjusted with a VIDEO signal input.

•Menu operation is not possible during Freeze functions.

•Displaying the SETUP submenu will cancel the Magnify and Freeze functions.

20. 3M™ Personal Projector MP8746/MP8747 © 3M IPC 2000