Knoll HD284 user manual

Page 19

19

Native: this mode bypasses the internal scaler, displaying the image with no resizing. Since the native resolution is 1280x720 and 4x3 video images are approximately 640x480, 4x3 images will always be smaller than the display and will be centered in the display. Computer images 1024x768 or smaller will also be centered in the display. If a 16x9 video source or a 1280x1024 or larger computer source is viewed, it will display up to 1280 pixels and 720 lines from the center of the input.

16:9: the default is 16:9, which preserves the 16:9 aspect ratio and is designed to be used with content that is Enhanced for Widescreen TVs.

4:3: resizes the image from its original version to fit a standard 4:3 aspect ratio screen. If you have a 4:3 source on a 16:9 screen, the image is placed in a 16:9 space, so black bars appear at the sides of the image.

Letterbox: preserves the 16:9 aspect ratio. If you have a 16:9 source and screen, the image fills the screen. If your source is letterboxed, the image expanded to fill the screen.

Image 19
Contents HD284 UL, CUL, TÜV, NOM, IRAM, GOST, CCC, MIC, S-JQA Table of Contents Safety Instructions Usage Guidelines Knoll HD284 IntroductionProjector Positioning Setting UP the ProjectorHD284 Projection Distances 169 Image Rear Connector PanelVideo Connections Connecting a Video DeviceConnecting a Video Device Displaying an Image Video or Computer Connecting the power cableDisplaying a video image Connecting to a computer Turning off the projector Troubleshooting your setupPower Save Shutting down the projectorPage Page Using the projector keypad buttons Troubleshooting the remote Using the remote controlOptimizing video images Using the menusCustomizing the projector Picture menu Page Page Advanced settings Following options are for computer or Hdtv sources only Settings menuSystem Cleaning the lens MaintenanceLoosen the captive screw on the lamp module Replacing the projection lampResetting the lamp timer SpecificationsRed LED behavior and projector errors Page Page RS232 Terminal Specifications and Commands Supported commands GCG RCG Limited Warranty