7
HD284 Projection Distances 16:9 Image
| Screen Diagonal | 92” | 103” | 106” | 110” | 122.5” | 146.75” | 165.25” |
| Min. Distance | 133.3” | 149.6” | 153.3” | 160” | 178.33” | 213.33” | 214” |
| Max. Distance | 166.6” | 187” | 191.6” | 200” | 222.9” | 266.6 | 299” |
| Screen Offset | 7.3” | 8.2” | 8.4” | 8.8” | 9.8” | 11.7” | 15” |
| | | | | | | | |
Note: Maximum distance to screen (16.9) = 1.816 x screen diagonal size Minimum distance to screen (16.9) = 1.452 x screen diagonal size Screen offset (image drop or rise) (16.9) = 0.08 x screen diagonal size
Rear Connector Panel
The projector provides eight discreet video connectors:
two component RCA, two S-video, one composite RCA, one M1-DA (HD, DVI, and computer), one VESA (HD, HD component, and computer) and one component D5.
It also has a mini-jack input for a Knoll, Niles or Xantech-compatible IR repeater and an RS-232 connector for serial control. The Command Line Interface (CLI) specifications and commands are listed in the Appendix.
Two 3.5 mm mini- jack triggers provide 12-volt current. Trigger 1 provides a con- stant output while the projector is on. If you connect your projection screen to Trigger 1, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position. Trigger 2 provides a 4:3 aspect trigger. When you select 4:3 in the Aspect Ratio menu or from the Resize button on the remote, a 12v signal will be sent after a five second delay. Use this trigger for screens with 4:3 aspect curtains. When you switch back to 16:9 format, the curtains open to reveal the entire screen.
