Knoll HD284 user manual Rcg

Page 33

33

Red Gain

RCG

1-63

32

Skintone Bypass Enable	SBE	0-1		0
Source	SRC	0-7		2
		0	= Video 1, MI
		1	= Video 2, VESA
		2	= Video 3, Component 1
		3	= Video 4, S-Video 1
		4	= Video 5, S-Video 2
		5	= Video 6, Component 2
		6	= Video 7, Composite
		7	= Video 8, D5
Startup Logo	DSU	0-1		1
Tint	TNT	2-254		128
Tracking	MTS	n/a		n/a
Translucent OSD	TOE	0-1		1
TrueLife Enable	TLE	0-1		0
Vertical Position	VPS	n/a		n/a
Video Standard	VSU	0-3		0
		0	= Auto
		1	= NTSC
		2	= PAL
		3	= SECAM

Image 33

Contents HD284 UL, CUL, TÜV, NOM, IRAM, GOST, CCC, MIC, S-JQA Table of Contents Safety Instructions Usage Guidelines Knoll HD284 IntroductionProjector Positioning Setting UP the ProjectorHD284 Projection Distances 169 Image Rear Connector PanelVideo Connections Connecting a Video DeviceConnecting a Video Device Connecting the power cable Displaying an Image Video or ComputerDisplaying a video image Connecting to a computer Power Save Troubleshooting your setupShutting down the projector Turning off the projectorPage Page Using the projector keypad buttons Troubleshooting the remote Using the remote controlUsing the menus Optimizing video imagesCustomizing the projector Picture menu Page Page Advanced settings Following options are for computer or Hdtv sources only Settings menuSystem Cleaning the lens MaintenanceLoosen the captive screw on the lamp module Replacing the projection lampResetting the lamp timer SpecificationsRed LED behavior and projector errors Page Page RS232 Terminal Specifications and Commands Supported commands GCG RCG Limited Warranty