4-3. Projector Power Down
Press the Standby button to place the projector in the standby mode. The cooling fan motor will continue to run.
9Note
Switching the power off before the fan has cycled off, will decrease the life of the projection lamp.
1.Wait until the cooling fan motor cycles off then press the main power switch to Off.
2.Turn off the power to your input devices.
3.To transport the projector, disconnect the power cord, computer cable, mouse cable and audio/video cables. Fully retract the projection lens to protect it during transport.
4-4. Using System Menus
You can use the control panel buttons (Figure
Press the up/down or left/right ARROW KEYS on the control panel or move the DISC PAD on the remoteto navigate through the submenus and select menu items.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Enter | for setup sub | menu |
|
|
|
|
|
|
|
|
|
|
| ||||||
| Menu | clear menu |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Setup |
|
|
|
| Sync |
|
|
| VESA 800 x 600 60 Hz |
|
|
|
|
|
| ||||
| Option |
|
|
|
|
| - |
|
| + |
| Brightness | - |
|
| + |
|
| ||
|
|
|
| Tracking | 1056 | Contrast |
|
|
|
|
|
| ||||||||
|
|
|
| - |
| + |
|
| ||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
| H. off. |
|
| - |
|
| + |
| Inverse |
|
| off |
|
| |
|
|
|
|
| V. off. |
|
|
|
|
|
|
| Pix. | 800x600 |
| |||||
| Audio |
|
|
|
|
| - |
|
| + |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Data |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Help Window
Setup Submenu
1.Press the MENU button to display the main menu.
2.Press the up/down ARROW KEYS or move the DISC PAD up/down to choose a sub- menu.
3.Press the ENTER button to select the sub– menu.
4.Press the up/down ARROW KEYS or move DISC PAD to select a menu item in the sub- menu.
5.Press the left/right ARROW KEYS or move the DISC PAD left/right to change the value of a menu item.
6.Press the ENTER button, if required, to confirm the change to the menu item.
9Note
When the background of the displayed item turns red, you must press the ENTER button to confirm the change.
7.Press the MENU button to exit the sub- menu and return to the main menu.
8.In some cases, a message will display in the help window asking you to confirm the changes made in the
9.Press the MENU button to exit the main menu display and return to the projected image.
8 | 3M™ Multimedia Projector MP8610 | © 3M 1998 |