3M MP8610 manual Replacing the Lamp

11.Install the new lamp (3M Lamp Kit Part Number 78-6969-8577-5) by pushing down on the ends of the lamp (8) with equal pressure. Take care to correctly align the lamp with the bubble (8a) facing upward (see figure 6-3).

9Important Note

Do not touch lamp glass with fingers. Hold lamp by the metal ends only.

12.Fold the lamp housing (6) into the closed position until the lock tab (5) secures it.

13.Insert the lamp access door (1) and slide it closed to engage the lock tab (3).

14.Insert the two screws (2).

Figure 6-3. Replacing the Lamp

15. Replace the air filter (included in the lamp kit). See Section 7-1.

9Important Note

Always change the air filter when the lamp is replaced. When you order a metal halide lamp, it comes in a kit which includes an air filter.

14 3M™ Multimedia Projector MP8610 © 3M 1998