3M MP8610 manual Remote Control Button Functions, Remote Button Description of Button Function

5-3. Remote Control Button Functions

Remote Button	Description of Button Function
	Press to switch the projector between Standby
	mode (lamp off, fan off) and operation mode (lamp
	on, fan on).
PC	Switches to PC mode.
VIDEO	Switches to video mode. When in video mode, the
	video source can be selected (Video or S-Video) by
	pressing the key repeatedly.
AUX	Not used
MENU	Start the On Screen Menu System for projector
	adjustment.
DISC PAD	Mouse emulation ON, disc pad controls the
	movement of the pointing device.
	Emulation OFF, disc pad centers image on screen.
L/ENTER	Mouse emulation ON, left mouse button. Mouse
	emulation OFF, Enter button for confirmation of a
	selection.

RRight mouse button, when mouse-emulation active.

1-6			Not used.
REVEAL/7			Press REVEAL to cover the image on the screen
			with a gray mask. Use the disc pad to reveal the
			image or press REVEAL again to return full screen
			projection of image.
BLANK/8			Removes projected image, white background.
			Press again to return projection image.
TIMER/9			When the key is operated the timer-window appears
			in the lower part of the display. Repeated operation
			of the key switches over to full image display of the
			timer and back to data projection. The timer starts
			with the last used adjustment. A new start value is
			entered by operating the key ENTER and adjusting
			the value with the disc pad. Operating the ENTER
			key again starts the timer. When the timer has run
			down, the timer window blinks repeatedly.
OPTIMIZE			Optimize (adjust) brightness and contrast settings
			for best picture.
		VOL	Volume adjustment.
			Mute.
	BRIGHT		Brightness adjustment.
MOUSE			Press ON/Off to activate/deactivate mouse
			emulation capability.
			ON: The L and R buttons operate the left and right
			mouse key functions. Drag-and-drop functions are
			possible by simultaneous operation of the L/R
			mouse key and disc pad.
			OFF: L button is the Enter confirmation key.
			R button not used. Disc pad centers image.
POINTER			Places a pointing device on the screen. Move
			pointer by operating the disc pad.
MAGNIFY			Press MAGNIFY to double the image size in
			horizontal and vertical direction. The details of the
			middle of the picture can be seen. Move the disc
			pad to displace the magnified area within the image.
			Press the MAGNIFY key again to switch back to
			normal presentation.
			In Video mode, press MAGNIFY to switch between
			scaled and unscaled representation. This is only for
			NTSC video.
FREEZE			Stores (freezes) the projected image. Press
			FREEZE again to return the projection of the
			current image.

VIDEO AUX

PC MENU

ENTER

L		R
1	2	3
4	5	6
7	8	9
REVEAL	BLANK	TIMER
	0
OPTIMIZE
VOL		BRIGHT
MOUSE		FREEZE

POINTER MAGNIFY

Figure 5-3. Remote Control

©3M 1998 3M™ Multimedia Projector MP8610 11