3M MP8610 manual Glossary of Terms

Page 33

Glossary

Glossary of Terms

Amorphous Silicon

See Thin-Film Transistor.

Composite video

A video signal that combines all color and timing components of the picture in a single input line. The U.S. standard is NTSC. European standards are PAL and SECAM.

Hz, KHz, MHz (Hertz, Kilohertz, Megahertz)

Hertz is a unit of measurement used to express the frequency, in cycles per second, of an electrical signal or event. (Kilohertz = 1000, Megahertz = 1 million cycles per second).

Keystone correction

Keystoning (distorted image) is caused when the path of the projector light beam is not perpendicular to the screen. Projectors normally project the image with an angle (e.g. 16°) on the screen. The optical system can be designed for distortion free projection at this angle (keystone correction).

Lumens

A measure of light output on a screen or other surface. One lumen is the light of one candlepower on each square foot of a surface of a sphere at a radius of one foot from the light source.

Metal halide lamp

A metal halide lamp is a modified mercury arc lamp that is extremely bright. It is filled with a gas with elements known as “halogens”. The properties of this fill gas allows the lamp to burn longer and brighter than ordinary incandescent lamps.

NTSC (National Television Systems Committee)

Standard for television signals and other video equipment signals. Uses interlaced scans and 525 horizontal lines per frame at a rate of 30 frames per second.

PAL (Phase Alternate Line)

The format for color television signals used in England, Germany, the Netherlands, and several other countries. PAL is an interlaced format with 25 frames per second and 625 lines per screen.

Pixel

Short for “picture element.” Unique position on a display that consists of a single dot or group of three dots (red, green & blue). Total pixels are usually expressed in horizontal x vertical dimensions (e.g. 640 x 480).

Power ON/OFF switch

The power ON/OFF switch is used to turn the machine on and off. The power switch is located on the back of the projector in the lower left-hand corner.

 

 

 

 

© 3M 1998

3MMultimedia ProjectorMP8610

29

Image 33
Contents MP8610 Multimedia Projector Operator’s Guide Page Table of Contents Glossary Safeguards Warranty Unpack Contents of Shipping BoxInventory List Keep Your Packing MaterialsMachine Characteristics Product DescriptionParts Identification List Quick Set Up Projector Set UpCable Connections Control Panel Keypad Projector Terminal ConnectionsMouse Connection Image Size Projector-to-Screen DistanceStandby Mode Operating InstructionsProjector Start Up Using System Menus Projector Power DownSubmenu Menu Item Explanation of Adjustment/Setting Menu Adjustments/SettingsRemote Control How to Operate the Remote ControlReplacing the Batteries Remote Button Description of Button Function Remote Control Button FunctionsLamp Life Indicator Lamp InformationMetal Halide Projection Lamp Removing Lamp Door Replacing the LampReplacing the Lamp Replacing The Air Filter MaintenanceOverhead Cleaner Cleaning the ProjectorTroubleshooting Problems TroubleshootingService Information Technical Specifications Appendix a Technical SpecificationsProjector-to-Screen Distance Physical DimensionsProjector-to-Screen Distance Appendix B Compatibility/Video Standards Video Input Signal TerminalSetting Representation, Resolution Appendix C Detailed Setup Information3M Multimedia Projector MP8610 Ntsc Factory Default SettingsAccessory Parts List Appendix D Replacement Parts/AccessoriesHow to Order Figure D-1. Power Cord Sets Power Cord SetsGlossary of Terms GlossarySync Index IndexIntentionally Blank 3M Austin Center 3M Canada 3M Mexico, S.A. de C.V 3M Europe