3M MP8610 manual Menu Adjustments/Settings, Submenu Menu Item Explanation of Adjustment/Setting

4-5. Menu Adjustments/Settings

Depending on the current video source selection, the menu items for either the Video Menu or the Data Menu will display. The table below lists all the menu items that can be adjusted.

An asterisk (*) indicates the item appears on the Data menu only, two asterisks (**) indicate the item appears on the Video/S-VHS menu only and no marking ( ) indicates the item is common to both menus.

Submenu	Menu Item	Explanation of Adjustment/Setting
Setup*/Picture**	<Mode>*	Selection of graphic mode (e.g. VGA 640 x 480, VESA 800 x
		600 72 Hz, etc.). Five user modes. See Appendix C-2.
	Brightness	Image brightness.
	Contrast	Image contrast.
	V. off.* (vertical offset)	Adjusts the vertical position of the image.
	H. off.* (horizontal offset)	Adjusts the horizontal position of the image.
	Color**	Color saturation.
	Inverse*	Inverse image displayed. (Default=off)
	Sync*	Manual synchronization (phase) or automatic adjustment
		using Enter.
	Tracking*	Manual screen width (total pixel number/line) or automatic
		adjustment using Enter.
	Pix.*	Image format. (For unscaled image use 800 x 600)
Option	Projection	Change image direction for rear, ceiling mount, rear ceiling
		mount and normal projection.		(Default=std.)
	Lamp Mode	Select lamp power: eco. (low),		std. (high) (Default = eco.)
	Remote	Turn remote control feature On/Off. (Default=On)
	Auto Mode*	Turn automatic mode detection On/Off. (Default=On)
	Language	Select menu display language. (Default=English)
	Help	Turn menu help text messages On/Off. (Default = On)
	Std.**	Selection of video standard (Default = Auto)
	Lamp*	Lamp life indicator. Green bar - lamp is good. Red bar -
		lamp needs replacement.
	Sog*	Sync-On-Green level. Only for Sync-On-Green mode.
	Deinterlacing**	On = standard video input (VCR)
		Off = motion video input (camera)
	Reset	Restores video modes to factory default settings.
	<Sync Mode>*	Change synchronization mode (separate, composite, Sog).
	Hue**	Color level for NTSC video.
	NTSC**	Default setting of NTSC image (scaled or unscaled)
Audio	Volume	Volume level.
	Treble	Treble setting.
	Bass	Bass setting.
	Balance	Left/right balance of speakers.
	Audio	Speakers On/Off. (Default = On)
	Stereo	Stereo sound On/Off. (Default = On)
	<Audio assignment>	Select audio-in channels (Audio-1/Audio-2) to speakers
		according to video selection.
		Audio-In 1: Data	S-VHS S-VHS
		Audio-In 2: Video	Data	Video (Default=Data/Video)
<Video Mode>		Select video source: Data, Video or S-VHS

©3M 1998 3M™ Multimedia Projector MP8610 9