LG Electronics 42LS75A 49LS75A 55LS75A owner manual Picture ID Settings

Page 32

32ENTERTAINMENT

ENGLISH

PICTURE ID Settings

PICTURE ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. If you assign the PICTURE ID using the remote control, only displays with matching PICTURE ID and Set ID can be controlled remotely.

1Assign the Set ID to the installed monitors as shown below.

IR & Light Sensor

RS-232C cables

PICTURE ID ON [2]

3Assign the Set ID to the selection of your choice.

••A set with a different Set ID from the PICTURE ID cannot be controlled by IR signals.

NOTE

••If PICTURE ID is set to 2, only the upper right monitor, which has a Set ID of 2, can be controlled by IR signals.

••If you press the green OFF button for PICTURE ID, the PICTURE IDs for all monitors are turned off. If you then press any button on the remote control, all monitors can be controlled by IR signals regardless of Set ID.

••With PICTURE ID ON, you can only increase the PICTURE ID by 1. You cannot decrease it.

2Press the red ON button on the remote control to assign the PICTURE ID.

Image 32

Contents Monitor Signage Table of Contents Licenses Assembly and Preparation AccessoriesSP-2100 Optional AccessoriesScrews Power Cord AN-WF500Parts and Buttons ButtonsConnection Panel Buttons DescriptionConnecting the Stand Connecting the SpeakersPortrait Layout Connecting IR & Light SensorUsing Kensington Lock Connecting the OPS OPS Player Attaching and removing the LG Logo Bracket Removing the LG LogoInstalling on a Wall Securing the monitor to a wall optional Remote Control Volume Up/Down ButtonA Button Number and Alphabet buttonsExit USB Menu ControlConnecting to a PC Making ConnectionsHD Receiver/DVD/VCR Camcorder/Camera/Gaming Device Direct Connection Using the Router Using the InternetExternal Device Connection English Daisy Chain Monitors Using the Multi Display Mode function Using the Input List Using My MediaConnecting USB storage devices Remote Control HomeTips for using USB storage devices To use Select Play Remote Control Home To set Device Selection Remote Control HomeFiles Supported by My Media Supported External Subtitle FormatSupported Internal Subtitle Format Supported Video CodecSupported Audio File Supported Photo FileTips for Playing Video Files To play video files on display Remote Control HomeViewing Videos English Viewing image files Remote Control Home Viewing music files Remote Control HomeViewing Photos Listening to MusicSettings Information SuperSign ContentsFile Manager Picture ID Settings Main Menu Settings Quick SettingsPicture Settings Remote Control Settings Picture Picture Adjust Noise Reduction Mpeg NoiseReduction Black Level Real CinemaEnglish Sound Settings Network Wi-Fi Connection Network SettingsTo Set Your Network Remote Control Settings Tips for Network Setting General Settings Tips for Wireless Network SettingResets all monitor settings Troubleshooting Does the Check signal cableProblem Action No image is displayedScreen color is abnormal Problem Action Operation does not work normally Problem ActionAfter-image appears on the product Audio function does not workProduct Specifications 42LS75AApplicable only for models that support the speakers 49LS75A Mm x 637.4 mm x 31.7 mm / 15.6 kg 55LS75A Mm x 713.7 mm x 31.7 mm / 20.7 kg Product Dimensions 135.149LS75A 1230.4 28.8 31.7 701 776 713 135.5 727.4 415.2 400 150 150.6 Horizontal Vertical Resolution Frequency Frequency Hz KHz Hdmiops / DVI / Displayport PC Support ModeDTV mode IR Codes Code Hex Function RemarksSome key codes are not supported depending on the model Connecting the cable RS-232C ConfigurationsTo Control Multiple Products Communication ParameterCommand Reference List HexadecimalEnglish Acknowledgement Transmission/Reception ProtocolTransmission Power Command k a Energy Saving Command j q Select Input Command x bAspect Ratio Command k c Contrast Command k gTransmission Kt Set ID DataCr Sound mode Command d y Selects a sound mode Volume Control Command k f Adjusts the playback volumeDay and Time 2 hour/minute/second are set Language Command f i Sets the OSD language On Timer Input Command f uAuto Power Off 4 Hours Command m n Key Command m c Reset Command f kCurrent temperature Command d n White balance red gain Command j m White Balance Green Gain Command j nTile Mode Command d d Natural Mode in Tile mode Command d j Backlight Command m g Check Tile Mode Command d zScreen Off Command k d Tile ID Command d IR Operation Command t p DPM Select Command f jPower On Delay Command f h Local Key Operation Command t o Status Command sCheck Screen Command t z Sets Check Screen Daylight Saving Time Command s dCopyright notices are available for download