Onkyo TX-NR709 instruction manual Network, Firmware Update, Dhcp

Page 60

Network

After modifying the network settings, you must confirm the changes by executing “Save”.

This section explains how to configure the AV receiver’s network settings manually.

If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set to use DHCP to configure itself automatically by default (i.e., DHCP is set to “Enable”). If, however, your router’s DHCP server is disabled (you’re for example using static IP), you’ll need to configure these settings yourself, in which case, a knowledge of Ethernet networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.

MAC Address

This is the AV receiver’s MAC (Media Access Control) address. This address cannot be changed.

DHCP

`Enable

`Disable

This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings.

Note

If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself.

IP Address

`Class A:

10.0.0.0” to “10.255.255.255

`Class B:

172.16.0.0” to “172.31.255.255

`Class C:

192.168.0.0” to “192.168.255.255” Enter a static IP address provided by your ISP. Most routers use Class C IP addresses.

Subnet Mask

Enter the subnet mask address provided by your ISP (typically 255.255.255.0).

Gateway

Enter the gateway address provided by your ISP.

DNS Server

Enter the DNS server address provided by your ISP.

En

Proxy URL

To use a Web proxy, enter its URL here.

Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

Network Control

`Enable

`Disable

This setting enables or disables control over the network.

Note

When set to “Enable”, the NET indicator is dimly-lit and the power consumption slightly increases in standby mode.

Control Port

`49152” to “65535

This is the network port used for control over the network.

Note

When the “Network Control” setting is set to “Disable”, this setting is cannot be selected.

Firmware Update

See “Firmware Update” for the update procedure

(page 80).

Note

Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

It takes maximum 60 minutes to complete the firmware update.

Version

Displays the current version of the firmware.

Receiver

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update the AV receiver’s firmware. Do not shutdown the power of the AV receiver while updating.

Universal Port

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while updating.

Note

This update shall not be performed when no dock is connected to the UNIVERSAL PORT jack.

60

Image 60
Contents TX-NR709 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features Services available may vary depending on the regionAmplifier ProcessingTHX Select2 Plus Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesRear Panel Front L/R, CENTER, Surr L/R, SB/FH/FW* L/R, SubwooferZone 2 Line OUT jacks Remote Controller Controlling the AV ReceiverDimmer button Display button Muting button Controlling the tunerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Number SpeakersUsing Dipole Speakers Using a Powered SubwooferBi-amping the Front Speakers TipConnecting a Power Amplifier Connecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Audio Return Channel ARC functionJack Components Assignable Connecting Your Components E F G HHow to record a video source Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordPlug the power cord into an AC wall outlet Taiwan modelsTurning On/Off the AV Receiver Turning OnTurning Off AV receiver comes on, the display lightsSelecting the Language for the Onscreen Setup Menus Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Playing a USB Device Listening to Internet RadioListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioPresetting AM/FM Stations Using RDS excluding North American and Taiwan modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure First measurement positionWhen you’ve finished making the settings, press Adjust the subwoofer volume level to 75 dB` Cancel Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDTS DSD*6Listening Mode Description Input Speaker Source Layout Neo6 Audyssey DSX *8THX Listening Mode Description Input Speaker Source Layout Used. The Neo6 indicator lights on the displayFor 7.1-channel playback Sources for 6.1/7.1-channel playbackUsing the Home Menu Using the Sleep TimerSetting the Display Brightness Using Headphones Displaying Source InformationChanging the Input Display Selecting Speaker LayoutUsing Easy Macros RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory NotesInput/Output Assign Monitor OutSUB Hdmi OUT SUBHere are the default assignments Hdmi InputComponent Video Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PortSpeaker Setup Speaker SettingsDigital Audio Input Analog Audio InputSubwoofer Phase FrontCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Wireless Subwoofer Speaker DistanceLevel Calibration UnitEqualizer Settings THX Audio SetupBGC Audio Adjust Multiplex/MonoDolby Theater-Dimensional Audyssey DSXLFE Level Source Setup AudysseyIntelliVolume SyncName Edit Picture Adjust To correct a characterWide Mode*1*2 Picture Mode*1Audio Selector Listening Mode Preset Charge ModeHardware Setup Volume SetupOSD Setup MiscellaneousTuner AM/FM Frequency Step North American and Taiwan modelsAM Frequency Step European, Australian and Asian models Hdmi ControlRIHDAuto Standby Audio TV OutAudio Return Channel Lip SyncFirmware Update NetworkDhcp Remote Controller Setup Lock SetupUsing the Audio Settings Audyssey Music Optimizer Late NightRe-EQ Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierZone Making Zone 2 ConnectionsAdjusting the Volume for Zone Operating on the remote controllerControlling Zone 2 Components Using a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetMuting Zone Press ZONE2 followed by MutingUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock Controlling Your iPod/iPhone RI DockAvailable buttons Repeat Random DisplayMenu ModePreprogrammed Remote Control Codes Looking up for Remote Control CodeEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsEnter Setup Search Repeat Random Mode VCR/PVR8SOURCE*1 Input Guide TOP MenuLearning Commands Deleting Acquired CommandsFollowing buttons cannot learn new commands RemoteUsing Normal Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting PowerAudio There’s no sound with a certain signal format Can’t select the Pure Audio listening modeSpeaker volume cannot be set as required About DTS signalsRemote Controller VideoTuner UP-A1 Dock for iPod/iPhone RecordingZone Music Server and Internet RadioUSB Device Playback OthersImportant Note Regarding Video Playback Component Video Monitor OUTFirmware Update Update procedureUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkError Code Description Updating the Firmware via USBErrors during an update via USB Onkyo Sound & Vision CorporationConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats OUTVideo Resolution Chart OutputOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iUsing an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerAbout Hdmi Supported Audio FormatsAbout Copyright Protection Network/USB Features Connecting to the NetworkNetwork Requirements Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaSpecifications Amplifier Section Tuner SectionVideo Section GeneralAudio Outputs OthersMemo Memo 4 0 0 6 9
Related manuals
Manual 96 pages 21.19 Kb

TX-NR709 specifications

The Onkyo TX-NR709 is a high-performance home theater receiver that has garnered attention for its impressive audio capabilities and connectivity options. Designed for audiophiles and home cinema enthusiasts, this model combines advanced technologies and a plethora of features to ensure an immersive viewing and listening experience.

One of the standout characteristics of the TX-NR709 is its capacity to handle multiple audio formats. It supports the latest Dolby TrueHD and DTS-HD Master Audio, allowing for lossless audio playback that captures the nuances of your favorite films and music. With an impressive 7.2 channel configuration, the receiver provides rich and dynamic sound, making it suitable for both standard and expansive home theater setups.

Equipped with Onkyo’s proprietary WRAT (Wide Range Amplification Technology), the TX-NR709 delivers high-quality sound reproduction while minimizing distortion. This technology ensures clarity in sound across all volume levels, making it ideal for both quiet evenings and epic movie nights. The receiver also features a 100 watts per channel output, providing ample power for even the most demanding speakers.

For those who prioritize connectivity, the TX-NR709 does not disappoint. It boasts a comprehensive array of inputs, including six HDMI ports, ensuring compatibility with various devices such as gaming consoles, Blu-ray players, and set-top boxes. This model supports 3D video and 4K upscaling, enabling users to enjoy their content in stunning high definition.

Additionally, the receiver features built-in support for streaming services, allowing users to access music from various platforms effortlessly. With technologies like DLNA and AirPlay compatibility, streaming from smartphones, tablets, or computers is seamless. Users can also take advantage of the receiver's network capabilities to listen to internet radio stations and access their digital music libraries.

Setting up the TX-NR709 is made easy with the inclusion of Audyssey MultEQ technology, which automatically calibrates the receiver's output to match the acoustics of your room. This ensures optimal sound quality tailored to your specific environment.

Overall, the Onkyo TX-NR709 is a versatile and powerful choice for home theater enthusiasts. Its combination of cutting-edge audio technologies, abundant connectivity options, and user-friendly setup features make it a standout receiver in the competitive home audio market. Whether for movies, music, or gaming, the TX-NR709 aims to deliver a captivating audio experience that elevates any entertainment session.