Onkyo TX-NR709 Using an RIHD-compatible TV, Player, or Recorder, About p-compatible components

About p-compatible components

The following components are p-compatible (as of January 2011).

■TV

•Toshiba REGZA-LINK compatible TV

•Sharp TV

■Players/Recorders

•Onkyo and Integra p-compatible players

•Toshiba REGZA-LINK compatible players and recorders (only when used together with Toshiba REGZA-LINK compatible TV)

•Sharp players and recorders (only when used together with Sharp TV)

*Models other than those mentioned above may have some interoperability if compatible with CEC, which is part of the HDMI Standard, but operation cannot be guaranteed.

Note

•For proper linked operations, do not connect more p- compatible components than the quantities specified below, to the HDMI input terminal.

–Blu-ray Disc/DVD players: up to three.

–Blu-ray Disc/DVD recorders/Digital Video Recorders: up to three.

–Cable/Satellite Set-top boxes: up to four.

•Do not connect the AV receiver to the other AV receiver/AV amplifier via HDMI.

•Proper linked operations are not guaranteed when more p-compatible components than the above-mentioned quantities are connected.

Operations that can be performed with

pconnection

■For p-compatible TV

The following linked operations are enabled by connecting the AV receiver to an p-compatible TV.

•The AV receiver will enter standby mode when the power of the TV is turned to standby.

•You can set on the menu screen of the TV to either output the audio from the speakers connected to the AV receiver, or from the speakers of the TV.

•It is possible to output the video/audio coming from the antenna or from the input jack of the TV from the speakers connected to the AV receiver. (A connection such as optical digital cable or similar is required above the HDMI cable.)

•Input to the AV receiver can be selected with the remote controller of the TV.

•Operations such as volume adjustment or similar for the AV receiver can be performed from the remote controller of the TV.

■For p-compatible players/recorders

The following linked operations are enabled by connecting the AV receiver to an p-compatible player/recorder.

• When the playback is started on the player/recorder, input of the AV receiver will switch to the HDMI input of the player/recorder that is playing back.

• Operation of the player/recorder is possible using the remote controller supplied with the AV receiver.

*Depending on the model used, not all operations may be available.