Onkyo TX-NR709 Specifications, Amplifier Section Tuner Section, Video Section, General, Hdmi

Page 92

Specifications

Amplifier Section

 

Tuner Section

Rated Output Power

All channels: (North American)

110 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

130 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

120 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(Others)

7 ch × 170 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Asian)

7 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

 

250 W (3 Ω, Front)

 

220 W (4 Ω, Front)

 

130 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance (Unbalance)

200 mV/47 kΩ (LINE)

2.5 mV/47 kΩ (PHONO MM)

Rated RCA Output Level and Impedance

200 mV/470 Ω (PRE OUT)

Maximum RCA Output Level and Impedance 4.6 V/470 Ω (PRE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5%)

Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

106 dB (LINE, IHF-A)

 

80 dB (PHONO, IHF-A)

Speaker Impedance

4 or 6 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1Vp-p/75 Ω (Component and S-Video Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 0.25 Vp-p/75 Ω (S-Video C)

1Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

FM Tuning Frequency Range

(North American and Taiwan)

87.5MHz - 107.9 MHz

(Others)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

General

 

 

 

Power Supply

(North American and Taiwan)

 

AC 120 V, 60 Hz

 

(Others)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American) 6.3 A

 

(Others) 570 W

Stand-by Power Consumption

(North American and Taiwan)

0.2W

(Others)

0.3W

Dimensions (W × H × D)

 

435 mm × 174 mm × 379 mm

 

17-1/8" × 6-7/8" × 14-15/16"

Weight

12.2 kg (26.9 lbs.)

■ HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7,

 

AUX INPUT

Output

OUT MAIN, OUT SUB

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

■Video Inputs

Component

IN 1, IN 2

S-Video

BD/DVD, VCR/DVR, CBL/SAT, GAME

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

AUX

Analog RGB

PC IN

■Video Outputs

Component

MONITOR OUT

S-Video

MONITOR OUT, VCR/DVR OUT

Composite

MONITOR OUT, VCR/DVR OUT

■ Audio Inputs

 

Digital

Optical: 2

 

Coaxial: 3

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

PC, TV/CD, PHONO

Multichannel Inputs

7.1

En

92

Page 91 Page 93
Image 92
Page 91 Page 93
Contents TX-NR709 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features Services available may vary depending on the regionAmplifier ProcessingTHX Select2 Plus Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesZone 2 Line OUT jacks Rear PanelFront L/R, CENTER, Surr L/R, SB/FH/FW* L/R, Subwoofer Remote Controller Controlling the AV ReceiverDimmer button Display button Muting button Controlling the tunerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Number SpeakersUsing Dipole Speakers Using a Powered SubwooferBi-amping the Front Speakers TipConnecting a Power Amplifier Connecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableJack Components Assignable Connecting Components with HdmiAudio Return Channel ARC function Connecting Your Components E F G HHow to record a video source Jack/Port Components AssignableConnecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordPlug the power cord into an AC wall outlet Taiwan modelsTurning On/Off the AV Receiver Turning OnTurning Off AV receiver comes on, the display lightsSelecting the Language for the Onscreen Setup Menus Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentEnter Understanding Icons on the DisplayPlaying an iPod/iPhone via USB Playing a USB Device Listening to Internet RadioTop menu of Internet Radio Listening to Other Internet RadioRegistering My Favorites*1 Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioMode Presetting AM/FM StationsUsing RDS excluding North American and Taiwan models Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure First measurement positionWhen you’ve finished making the settings, press Adjust the subwoofer volume level to 75 dB` Cancel Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDTS DSD*6THX Listening Mode Description Input Speaker Source Layout Neo6Audyssey DSX *8 Listening Mode Description Input Speaker Source Layout Used. The Neo6 indicator lights on the displayFor 7.1-channel playback Sources for 6.1/7.1-channel playbackSetting the Display Brightness Using the Home MenuUsing the Sleep Timer Using Headphones Displaying Source InformationChanging the Input Display Selecting Speaker LayoutUsing Easy Macros RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory NotesInput/Output Assign Monitor OutSUB Hdmi OUT SUBHere are the default assignments Hdmi InputComponent Video Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, PortSpeaker Setup Speaker SettingsDigital Audio Input Analog Audio InputSubwoofer Phase FrontCenter*1, Surround*1, Surround Back*2*3*4 Front Wide*1*2*4, Front High*1*2*4Wireless Subwoofer Speaker DistanceLevel Calibration UnitBGC Equalizer SettingsTHX Audio Setup Dolby Audio AdjustMultiplex/Mono LFE Level Theater-DimensionalAudyssey DSX Source Setup AudysseyName Edit IntelliVolumeSync Picture Adjust To correct a characterWide Mode*1*2 Picture Mode*1Audio Selector Listening Mode Preset Charge ModeHardware Setup Volume SetupOSD Setup MiscellaneousTuner AM/FM Frequency Step North American and Taiwan modelsAM Frequency Step European, Australian and Asian models Hdmi ControlRIHDAuto Standby Audio TV OutAudio Return Channel Lip SyncDhcp Firmware UpdateNetwork Using the Audio Settings Remote Controller SetupLock Setup Re-EQ Audyssey Music OptimizerLate Night Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierZone Making Zone 2 ConnectionsControlling Zone 2 Components Adjusting the Volume for ZoneOperating on the remote controller Using a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetMuting Zone Press ZONE2 followed by MutingUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock Controlling Your iPod/iPhone RI DockAvailable buttons Repeat Random DisplayMenu ModePreprogrammed Remote Control Codes Looking up for Remote Control CodeEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsEnter Setup Search Repeat Random Mode VCR/PVR8SOURCE*1 Input Guide TOP MenuLearning Commands Deleting Acquired CommandsFollowing buttons cannot learn new commands RemoteUsing Normal Macros Making MacrosRunning Macros Deleting MacrosAudio TroubleshootingPower There’s no sound with a certain signal format Can’t select the Pure Audio listening modeSpeaker volume cannot be set as required About DTS signalsTuner Remote ControllerVideo UP-A1 Dock for iPod/iPhone RecordingZone Music Server and Internet RadioUSB Device Playback OthersImportant Note Regarding Video Playback Component Video Monitor OUTFirmware Update Update procedureUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkError Code Description Updating the Firmware via USBErrors during an update via USB Onkyo Sound & Vision CorporationConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats OUTVideo Resolution Chart OutputOutput Input 4K *2 1080p/24 1080i 720p 480p/576p 480i/576iOperations that can be performed with Connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerAbout Copyright Protection About HdmiSupported Audio Formats Network Requirements Network/USB FeaturesConnecting to the Network Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaSpecifications Amplifier Section Tuner SectionVideo Section GeneralAudio Outputs OthersMemo Memo 4 0 0 6 9
Related manuals
Manual 96 pages 21.19 Kb

TX-NR709 specifications

The Onkyo TX-NR709 is a high-performance home theater receiver that has garnered attention for its impressive audio capabilities and connectivity options. Designed for audiophiles and home cinema enthusiasts, this model combines advanced technologies and a plethora of features to ensure an immersive viewing and listening experience.

One of the standout characteristics of the TX-NR709 is its capacity to handle multiple audio formats. It supports the latest Dolby TrueHD and DTS-HD Master Audio, allowing for lossless audio playback that captures the nuances of your favorite films and music. With an impressive 7.2 channel configuration, the receiver provides rich and dynamic sound, making it suitable for both standard and expansive home theater setups.

Equipped with Onkyo’s proprietary WRAT (Wide Range Amplification Technology), the TX-NR709 delivers high-quality sound reproduction while minimizing distortion. This technology ensures clarity in sound across all volume levels, making it ideal for both quiet evenings and epic movie nights. The receiver also features a 100 watts per channel output, providing ample power for even the most demanding speakers.

For those who prioritize connectivity, the TX-NR709 does not disappoint. It boasts a comprehensive array of inputs, including six HDMI ports, ensuring compatibility with various devices such as gaming consoles, Blu-ray players, and set-top boxes. This model supports 3D video and 4K upscaling, enabling users to enjoy their content in stunning high definition.

Additionally, the receiver features built-in support for streaming services, allowing users to access music from various platforms effortlessly. With technologies like DLNA and AirPlay compatibility, streaming from smartphones, tablets, or computers is seamless. Users can also take advantage of the receiver's network capabilities to listen to internet radio stations and access their digital music libraries.

Setting up the TX-NR709 is made easy with the inclusion of Audyssey MultEQ technology, which automatically calibrates the receiver's output to match the acoustics of your room. This ensures optimal sound quality tailored to your specific environment.

Overall, the Onkyo TX-NR709 is a versatile and powerful choice for home theater enthusiasts. Its combination of cutting-edge audio technologies, abundant connectivity options, and user-friendly setup features make it a standout receiver in the competitive home audio market. Whether for movies, music, or gaming, the TX-NR709 aims to deliver a captivating audio experience that elevates any entertainment session.
Top Page Image Contents