LG Electronics W1943T manual Using the Computer, Connect D-sub Cable PC

Connecting the Display

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map

	form 1 to 2 .
		NOTE
A		This is a simplified representation of the rear view.
	Connect DVI-D Cable	This rear view represents a general model; your display may differ
B	Connect D-sub Cable (PC)	from the view as shown.
		User must use shielded signal interface cables (D-sub 15 pin cable)
C	Connect D-sub Cable (Mac)
		with ferrite cores to maintain standard compliance for the product.

Power Cord Signal Cable

Varies according to model.

Wall-outlet type

OR

	Mac adapter
	For Apple Macintosh use, a separate plug adapter is
	needed to change the 15 pin high density (3 row) D-sub
Wall-outlet type	VGA connector on the supplied cable to a 15 pin 2 row
	connector.
	DVI-D (This feature is not available in all countries.)

2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically. (Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

A6