English

CROSSCUTTING (FIG. V)

To prevent serious injury:

•Do not allow familiarity or frequent use of your table saw to cause careless mistakes. Remember that even a careless fraction of a second is enough to cause a severe injury.

•Keep both hands away from the blade and the path of the blade.

•Never attempt to pull the workpiece backwards during a cutting operation. This will cause kickback and serious injury to the user can occur.

1.Remove the rip fence and place the miter gauge in a miter gauge groove on the table.

2.Adjust the blade height so it is 1/8 in. higher than the top of the workpiece.

3.Hold the workpiece fi rmly against the miter gauge with the blade path in line with the desired cut location. Move the workpiece to 1in. distance from the blade.

4.Start the saw and wait for the blade (1) to come up to full speed. Never stand directly inline of the saw blade path, always stand to the side of the blade that you are cutting on.

5.Keep the workpiece (2) against the face of the miter gauge (3) and fl at against the table. Then slowly push the workpiece through the blade.

6.Do not try to pull the workpiece back with the blade turning. Turn the switch OFF, and carefully slide the workpiece out when the blade is completely stopped.

WARNING

Always position the larger surface of the workpiece on the table when crosscutting and/or bevel crosscutting to avoid instability.

1

Fig. V 3

2

USING WOOD FACING ON THE MITER GAUGE (FIG. W)

Slots are provided in the miter gauge for attaching an auxiliary facing (1) to make it easier to cut very long or short pieces. Select a suitable piece of smooth wood, drill two holes through it and attach it to the miter gauge

with screws. Make sure the facing does not interfere with the proper operation of the sawblade guard. When cutting long workpieces, you can make a simple outfeed support by clamping a piece of plywood to a sawhorse.

Fig. W

1

BEVEL CROSSCUTTING (FIG. X)

This cutting operation is the same as crosscutting except the blade is at bevel angle other than 0°.

WARNING

Always work to the right side of the blade during this type of cut. The miter gauge (3) must be in the right side groove (2) because the bevel angle may cause the blade guard to interfere with the cut if used on the left side groove.

1.Adjust the blade (1) to the desired angle, and tighten the blade bevel lock knob.

2.Tighten miter lock handle at 90°

3.Hold workpiece fi rmly against the face of the miter gauge (3) throughout the cutting operation.

NOTE: When tilting the blade to 45°, the miter gauge handle will hit the blade guard.

Fig. X

1 2 3

– 20 –

Page 19 Page 21
Page 20
Image 20
Hitachi C 10LA instruction manual Crosscutting FIG, To prevent serious injury, Using Wood Facing on the Miter Gauge FIG. W
Page 19 Page 21

C 10LA specifications

The Hitachi C 10LA is a powerful and versatile miter saw that stands out in the realm of woodworking and construction tools. Known for its precision, efficiency, and durability, this saw is designed to meet the needs of both professional contractors and DIY enthusiasts.

One of the main features of the Hitachi C 10LA is its robust 15-amp motor, which delivers a remarkable no-load speed of up to 5,000 RPM. This high-speed capability allows users to make clean and accurate cuts through various materials, including hardwood, softwood, and even composite materials. The saw’s large cutting capacity provides a maximum miter cut of 52 degrees to the right and 45 degrees to the left, along with a maximum bevel cut of 45 degrees. This range of motion makes it ideal for creating precise angled cuts, commonly required for crown molding and other intricate woodworking projects.

The C 10LA also features a unique laser marker system that enhances cutting accuracy. This technology projects a laser line onto the workpiece, indicating exactly where the blade will cut, thereby eliminating guesswork and reducing the risk of errors. Additionally, the saw is equipped with a large, sturdy base, providing stability during use and reducing vibration for smoother operation.

Safety is a significant consideration in the design of the Hitachi C 10LA. It includes an electric brake that halts the blade almost instantly after the trigger is released, ensuring that users can operate the saw with confidence. Its dust collector attachment helps maintain a clean work environment by capturing sawdust and debris, which not only improves visibility but also promotes a safer workspace.

The C 10LA’s lightweight design, weighing approximately 26.3 lbs, coupled with a comfortable handle, makes it easy to transport and maneuver, whether in a workshop or on a job site. The saw is also designed for easy blade changes and maintenance, further enhancing its usability and convenience.

In summary, the Hitachi C 10LA miter saw combines powerful performance with advanced features, making it a reliable choice for tradespeople and hobbyists alike. With its high-speed motor, accurate laser guide, impressive cutting capacity, and safety features, it is well-equipped to handle a wide variety of cutting tasks with precision and ease.
Top Page Image Contents