English

POWER TOOL SAFETY

WARNING

Before using your table saw, it is critical that you read and understand these safety rules. Failure to follow these rules could result in serious injury or damage to the table saw.

Good safety practices are a combination of common sense, staying alert and understanding how to use your power tool. To avoid mistakes that could cause serious injury, do not plug in your power tool until you have read and understood the following safety rules:

1.READ and become familiar with this entire Operator’s Manual. LEARN the tool’s applications, limitations and possible hazards.

2. WARNING

Look for this symbol that identifies important safety precautions. It means BE ALERT! YOUR SAFETY IS INVOLVED!

3.NEVER OPERATE THIS MACHINE WITHOUT THE SAFETY GUARD IN PLACE FOR ALL THROUGH SAWING OPERATIONS.

4.DO NOT USE IN A DANGEROUS ENVIRONMENT such as damp or wet locations or in the rain. Keep work area well lighted.

5.DO NOT use power tools in the presence of fl ammable liquids or gases.

6.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

7.KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from the work area.

8.DO NOT FORCE THE TOOL. It will do the job better and safer if used at the rate for which it was designed.

9.USE THE RIGHT TOOL. Don’t force the tool or attachment to do a job for which it is not designed.

10.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, bracelets or other jewelry that may get caught in moving parts.

Non-slip footwear is recommended. Wear protective hair covering to contain long hair.

11.WEAR A FACE MASK OR DUST MASK. Sawing, cutting and sanding operations produce dust.

12.DISCONNECT TOOLS before servicing and when changing accessories, such as blades, cutters, etc.

13.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the OFF position before plugging tool into the power supply.

14.USE ONLY RECOMMENDED ACCESSORIES. Consult the Operator’s Manual for recommended

accessories. The use of improper accessories may cause injury to you or damage to the tool.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning ON.

16.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER OFF. Do not leave the tool before the blade comes to a complete stop.

17.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

18.DO NOT OVERREACH. Keep proper footing and balance at all times.

19.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for most effi cient and safest performance. Follow instructions for lubricating and changing accessories.

20.CHECK FOR DAMAGED OR LOOSE PARTS. Check for alignment of moving parts, binding of moving parts, loose mounting and any other conditions that may affect its safe operation. A guard or other part that is loose or damaged should be properly adjusted, repaired or replaced.

21.MAKE WORKSHOP CHILDPROOF with padlocks, master switches or by removing starter keys.

22.DO NOT operate the tool if you are under the

infl uence of any drugs, alcohol or medication that could impair your ability to use the tool safely.

23.USE A DUST COLLECTION SYSTEM whenever possible. Dust generated from certain materials can be hazardous to your health and, in some cases, a fi re hazard. Always operate the power tool in a well-ventilated area with adequate dust removal.

24.ALWAYS WEAR EYE PROTECTION. Any power tool can throw debris into your eyes that could cause permanent eye damage. ALWAYS wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday glasses have only impact resistant lenses. They ARE NOT safety glasses.

NOTE : Glasses or goggles not in compliance with ANSI Z87.1 could cause serious injury when they break.

25.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

– 4 –

Page 3 Page 5
Page 4
Image 4
Hitachi C 10LA instruction manual Power Tool Safety, English
Page 3 Page 5

C 10LA specifications

The Hitachi C 10LA is a powerful and versatile miter saw that stands out in the realm of woodworking and construction tools. Known for its precision, efficiency, and durability, this saw is designed to meet the needs of both professional contractors and DIY enthusiasts.

One of the main features of the Hitachi C 10LA is its robust 15-amp motor, which delivers a remarkable no-load speed of up to 5,000 RPM. This high-speed capability allows users to make clean and accurate cuts through various materials, including hardwood, softwood, and even composite materials. The saw’s large cutting capacity provides a maximum miter cut of 52 degrees to the right and 45 degrees to the left, along with a maximum bevel cut of 45 degrees. This range of motion makes it ideal for creating precise angled cuts, commonly required for crown molding and other intricate woodworking projects.

The C 10LA also features a unique laser marker system that enhances cutting accuracy. This technology projects a laser line onto the workpiece, indicating exactly where the blade will cut, thereby eliminating guesswork and reducing the risk of errors. Additionally, the saw is equipped with a large, sturdy base, providing stability during use and reducing vibration for smoother operation.

Safety is a significant consideration in the design of the Hitachi C 10LA. It includes an electric brake that halts the blade almost instantly after the trigger is released, ensuring that users can operate the saw with confidence. Its dust collector attachment helps maintain a clean work environment by capturing sawdust and debris, which not only improves visibility but also promotes a safer workspace.

The C 10LA’s lightweight design, weighing approximately 26.3 lbs, coupled with a comfortable handle, makes it easy to transport and maneuver, whether in a workshop or on a job site. The saw is also designed for easy blade changes and maintenance, further enhancing its usability and convenience.

In summary, the Hitachi C 10LA miter saw combines powerful performance with advanced features, making it a reliable choice for tradespeople and hobbyists alike. With its high-speed motor, accurate laser guide, impressive cutting capacity, and safety features, it is well-equipped to handle a wide variety of cutting tasks with precision and ease.
Top Page Image Contents