English

ASSEMBLY AND ADJUSTMENTS

R EMOVE THE STYROFOAM FROM THE CABINET- STAND (FIG. A & A-1)

WARNING

To avoid injury from an accidental start, make sure the STYROFOAM is removed from the cabinet stand.

1.Remove the back cover (2) of the base by removing the screws (1), three for each side.

2.Turn the blade elevation handwheel in front of the table saw to raise the motor (3).

3.Remove the styrofoam (4) under the motor.

4.Replace the back cover (2) and then tighten the screws (1), three for each side.

Fig. A

1

2

Fig. A-1

3

4

ASSEMBLY THE TABLE EXTENSION (FIG. B)

WARNING

To avoid injury, beware the weight of the table extension before assembling the table extension.

1.Place the left table extension next to the saw table, aligning the mounting holes (1).

2.Place bolts (2) and thread in mounting holes.

3.Place a straight edge or combination square on the saw table, across the table extension.

4.Adjust the mounting bolts (2) until the extension is fl ush with the saw table. Tighten.

5.Repeat these procedures for the right extension table.

Fig. B

1

2

ASSEMBLY THE FRONT AND REAR TABLE RAIL (FIG. B-1, B-2)

NOTE: Front of table rails assemblies are different.

Assembly the front rail (Fig. B-1)

1.Attach the right front side cover (1) into right front table rail (2). Repeat for the left front rail.

2.Place the hex. bolts M8-20 (3), hex bolts M8-16 (4) through the holes at the front table edge. Screw the square nuts (5) onto each bolts.

NOTE : Keep the bolts and square nuts loosened before front rail fi xed.

3.Attach the right front rail onto proper location by having the square nuts pass through the slot of the front rail. Repeat for the left front rail.

4.Attach the middle plug (6) to connect the two half front rail.

5.When the blade was installed, use the rip fence and gauge to adjust the front rail to proper location. When the front rail is level with table, then fi x the front rail by tightening the six bolts.

Fig. B-1

5 4

3

4

6

2

1

– 11 –

Page 10 Page 12
Page 11
Image 11
Hitachi C 10LA instruction manual Assembly and Adjustments, Emove the Styrofoam from the CABINET- Stand FIG. a & A-1
Page 10 Page 12

C 10LA specifications

The Hitachi C 10LA is a powerful and versatile miter saw that stands out in the realm of woodworking and construction tools. Known for its precision, efficiency, and durability, this saw is designed to meet the needs of both professional contractors and DIY enthusiasts.

One of the main features of the Hitachi C 10LA is its robust 15-amp motor, which delivers a remarkable no-load speed of up to 5,000 RPM. This high-speed capability allows users to make clean and accurate cuts through various materials, including hardwood, softwood, and even composite materials. The saw’s large cutting capacity provides a maximum miter cut of 52 degrees to the right and 45 degrees to the left, along with a maximum bevel cut of 45 degrees. This range of motion makes it ideal for creating precise angled cuts, commonly required for crown molding and other intricate woodworking projects.

The C 10LA also features a unique laser marker system that enhances cutting accuracy. This technology projects a laser line onto the workpiece, indicating exactly where the blade will cut, thereby eliminating guesswork and reducing the risk of errors. Additionally, the saw is equipped with a large, sturdy base, providing stability during use and reducing vibration for smoother operation.

Safety is a significant consideration in the design of the Hitachi C 10LA. It includes an electric brake that halts the blade almost instantly after the trigger is released, ensuring that users can operate the saw with confidence. Its dust collector attachment helps maintain a clean work environment by capturing sawdust and debris, which not only improves visibility but also promotes a safer workspace.

The C 10LA’s lightweight design, weighing approximately 26.3 lbs, coupled with a comfortable handle, makes it easy to transport and maneuver, whether in a workshop or on a job site. The saw is also designed for easy blade changes and maintenance, further enhancing its usability and convenience.

In summary, the Hitachi C 10LA miter saw combines powerful performance with advanced features, making it a reliable choice for tradespeople and hobbyists alike. With its high-speed motor, accurate laser guide, impressive cutting capacity, and safety features, it is well-equipped to handle a wide variety of cutting tasks with precision and ease.
Top Page Image Contents