Onkyo HT-R690 instruction manual 1 2 3, Using Headphones, AV Recording, PHONES jack

Page 38
Using Headphones

Using Headphones

1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the

PHONES jack.

Note

Always turn down the volume before connecting your headphones.

While the headphones plug is inserted in the PHONES jack, the speakers are turned off. (The Powered Zone 2 speakers are not turned off.)

When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, or Direct.

If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder).

1

2

3

Use the input selector buttons to select the source that you want to record.

You can watch the source while recording. The AV receiver’s MASTER VOLUME control has no effect on recording.

On your recorder, start recording.

On the source component, start playback.

If you select another input source during recording, that input source will be recorded.

En

38

Image 38
Contents Instruction Manual ContentsHT-R690 AV ReceiverAVIS Important Safety InstructionsFor Canadian Models PrecautionsFor U.S. models Modèle pour les CanadienAiming the remote controller Supplied AccessoriesInstalling the batteries Appendix ContentsTurning On & Basic Operations 8ON/STANDBY pageProcessing FeaturesAmplifier Connectionsf g h i j k l Front & Rear Panelsb c d e n o pe f g Displaya b c d jk l mnRear Panel a b cdklmn iuREMOTE CONTROL jackControlling the AV Receiver Remote Controllerd c a dj k a8RECEIVER buttonScrew-typespeaker terminals Connecting the AV ReceiverConnecting Your Speakers Push-typespeaker terminalsSpeaker Connection Precautions Speaker ConfigurationConnecting the Speaker Cables 1/3 of wall position Using a Powered SubwooferPowered subwoofer Corner position AV Cables and Jacks About AV ConnectionsConnecting AV components –“Audio Return Channel” is set to “Auto” page Connecting Components with HDMIAudio Return Channel ARC function Connecting Your Components A B C D E F G HHow to record a video source System On/Auto Power On Connecting Onkyo uComponentsConnecting a Recording Component Remote Control1 Plug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord Assembling the AM loop antennaTurning Off Turning On/Off the AV ReceiverTurning On h i aj b k cl dm e n f o gp q Controlling Contents of USB or Network DevicesPlayback Playing the Connected ComponentjMENU Understanding Icons on the DisplayPlaying an iPod/iPhone via USB kRETURNExtended Mode Music control Playing a USB DeviceListening to Internet Radio Extended Mode Video controlENTER Listening to Other Internet RadioRegistering My Favorites*1 Top menu of Internet RadioWindows Media Player 11 Setup Playing Music Files on a ServerRemote Playback Windows Media Player 12 SetupUsing the Tuner Listening to AM/FM RadioUsing Remote Playback Tuning into Radio StationsSelecting Presets Presetting AM/FM StationsTuning into stations by frequency Deleting PresetsUsing Basic Functions Using the Automatic Speaker SetupENTER 3 4 5 6 7When you’ve finished making the settings, press ENTERUsing a Powered Subwoofer Error MessagesChanging the Speaker Setup Manually `CancelMOVIE/TV button Using the Listening ModesListening Mode Buttons GAME buttonExplanatory Notes About Listening Modesf b e a pagereverberation of a large hall Onkyo-OriginalDSP Listening ModesListening Modes concert• Dolby PLIIx Game • Dolby PLIIx Movie• Dolby PLIIx Music • Dolby PLIIx MovieInput Listening ModeDescription SpeakerSetting the Display Brightness Using the Home MenuUsing the Sleep Timer Input*1Changing the Input Display Using the Music OptimizerDisplaying Source Information Muting the AV ReceiverRecording Using Headphones1 2 3 AV RecordingCommon Procedures in Setup Menu Advanced SetupOn-screenSetup Menus c 3. Audio Adjust d 4. Source SetupMonitor Out Input/Output AssignResolution HDMI InputDigital Audio Input Speaker SetupComponent Video Input BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORTFront Powered ZoneSubwoofer Center*1, Surround*1, Surround Back*2*3*4*5Double Bass Speaker DistanceLevel Calibration UnitMultiplex Input Channel Audio AdjustDimension Mono Input ChannelListening Angle Source SetupNeo:6 Music Center Image AudysseyReference Level Dynamic VolumeAbout Audyssey Dynamic Volume Audyssey Dynamic EQ Reference Level Offset `0dBENTER IntelliVolumeA/V Sync pageGame Mode*3*4*5 Wide Mode*1*2Picture Mode*1 Film Mode*3*5Audio Selector Audio SelectorCharge Mode Fixed ModeMaximum Volume Listening Mode PresetMiscellaneous Power On VolumeRemote ID Hardware SetupChanging the remote controller’s ID AM/FM Frequency StepAudio Return Channel HDMI ThroughAudio TV Out Lip SyncIP Address MAC AddressDHCP Subnet MaskUsing the Audio Settings Remote Controller SetupLock Setup SetupCinemaFILTER Late NightMusic Optimizer Late NightZone Making Zone 2 ConnectionsOperating on the remote controller Controlling Zone 2 ComponentsOperating on the remote controller Operating on the remote controllerAuto Power On Using the Onkyo DockiPod/iPhone Playback via Onkyo Dock Using the AV receiver’s Remote ControllerOther Remote Controllers Controlling Your iPod/iPhoneAuto Power On iPod/iPhone AlarmPage Entering Remote Control Codes Preprogrammed Remote Control CodesLooking up for Remote Control Code Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for OnkyoResetting REMOTE MODE Buttons Components Connected via uPage Audio TroubleshootingPower Can’t turn on the AV receiverAbout DTS signals There’s no sound with a certain signal formatThe speaker volume cannot be set as required Only the front speakers produce soundTuner Remote ControllerVideo The remote controller doesn’t workZone UP-A1Dock for iPod/iPhoneRecording Music Server and Internet RadioCan’t access the music files on a USB device USB Device PlaybackOthers Standby power consumptionpage Important Note Regarding Video PlaybackCOMPONENT VIDEO OUT Network Requirements Network/USB FeaturesConnecting to the Network Internet Access for Internet radioServer playback Server RequirementsUSB Device Requirements Remote playbackMP3 .mp3 or .MP3 Supported Audio File FormatsAbout DLNA WMA .wma or .WMAUpdate procedure Firmware UpdateUpdating the Firmware via Network Update via networkUpdate procedure Updating the Firmware via USBTroubleshooting Errors during an update via network8 9 10 11 12 13 Errors during an update via USBSignal Selection Connection Tips and Video Signal PathVideo Connection Formats Audio Connection Formats About Copyright Protection About HDMISupported Audio Formats Operations that can be performed with pconnection Using an RIHD-compatibleTV, Player, or RecorderAbout p-compatiblecomponents Players/Recorders3 Confirm the settings How to connect and setup1 Confirm the connecting and setting 4 Operate with the remote controllerVideo Inputs SpecificationsHDMI Video OutputsOutput Video Resolution ChartAvailable resolutions: 3840 ⋅ 2160 24/25/30 Hz Memo 2 9 4 0 0 6 5 Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY