Mitsubishi FR - S500 14.1, Communication settings, Communication-related parameters, 118

2.14.1		Communication settings				to		,
	Communication-related parameters
				Factory
Parameter			Name	Setting	Setting			Remarks	Reflection
				<NA, EC	Range				Timing
				version>
n1 (331)			Communication	0	0 to 31				After reset
			station number
n2 (332)			Communication	192	48, 96,				After reset
			speed		192
n3 (333)			Stop bit length	1	0, 1, 10,				After reset
					11
			Parity check
n4 (334)			presence/	2	0, 1, 2				After reset
			absence				Setting is enabled
			Number of		0 to 10,		when Pr. 30 = "1"
n5 (335)			communication	1					Immediately
					- - -
			retries
			Communication	0s	0, 0.1 to
n6 (336)			check time	<- - ->	999s,				Immediately
			interval (*1)	(*2)	- - -
n7 (337)			Wait time	- - -	0 to 150ms,				After reset
			setting		- - -
n11 (341)			CR/LF selection	1	0, 1, 2				After reset

*1. To make communication, set any value other than 0 in the communication parameter n6 "communication check time interval".

*2. Factory setting of NA and EC versions.

The parameter numbers within parentheses are those for use of the parameter unit (FR-PU04).

Refer to page 177 for the instruction codes.

Communication specifications

Item

Conforming standard

Number of inverters connected

Communication speed

Control protocol

Communication method

Communication specifications	Character system
	system	Sumcheck
	Stop bit length
	Terminator
	Check	Parity
		check
Waiting time setting

Computer

RS-485 Standard

1:N (max. 32 inverters)

Selected between 19200, 9600 and 4800bps

Asynchronous

Half-duplex

ASCII (7 bits/8 bits) selectable

Selectable between 1 bit and 2 bits.

CR/LF (presence/absence selectable)

Selectable between presence (even/odd) and absence

Presence

Selectable between presence and absence

118